Stove wire?

[NHBacon]

Does anybody know where to get stove wire? Size? The stoppers. I've been using the 1/16th wire from the Depot. Works ok but the other stuff would be lighter
Thank you

Sent from my SM-J727V using Tapatalk

 

[gudspelr]

I started with steel fishing leader and the associated leader “sleeves” to crimp the ends together to make the rings. I got heavier leader and saw it had nylon mixed into the stainless. It ended up being a bad deal. The nylon burned when I fired the stove up and most of them ended up popping open and left black gunk on the outside of the Ti. I found some stainless picture hanging wire that I could just get into the same fishing leader sleeves/connectors after I made them a little bit oval in shape. I cranked them down in the vise to be sure I had good compression and those have worked pretty well now. I will say, it was a bit annoying fiddling with the wire and getting the right lengths to give me the right diameter. A few are a little tighter than I’d like which makes them harder to slide on/off. Good luck, hope that helps.


Jeremy

 

[Gsquared]

Check out the link below. Seems like TiGoat has several parts ala carte that may help you. Good luck.

Pipe parts

 

[Napperm4]

If TiGoat doesn’t work out, try giving Brennen at Lite Outdoors a try. He sells all the stove parts including finished rings.

Awesome guy to deal with and I’m sure he’d be happy to send you some wire and crimps.

 

[Beendare]

You mean the stainless steel cable and crimps? McMaster Carr sells those cheap

 

[JigStick]

Tractor Supply sells 1/16 stainless cable and crimp sleeves. The weight difference between the ones I made with this and my titanium Seek Outside ones is marginal