Stockys recoil pad question

[AZ_Hunter]

I have a Stockys tikka sporter style (non-VG) stock that I am giving to a friend. The stock is fitted with the factory thin Limbsaver, but he needs a longer LOP.

Does anybody know what aftermarket pads fit? If we could add an inch to the LOP that would ideal.

Thank you.

 

[TNKnoxville]

I have a VG and put a LimbSaver, that fits my Roughtech stock, on it. It is a tiny bit small but not bad.

 

[NWBLKTAIL]

Is the VG and sporter not the same recoil pad? I’d call and verify but at a quick glance at the both of mine they look the same.
I imagine Stockys would make them the same just for efficiency VG/Sporter.

I used a #10809 airtech I believe for my VG it’s about as close as you can get without doing a grind to fit custom job

 

[AZ_Hunter]

Thanks guys. I did email stockys, but was maybe too specific with my question. They emailed back saying I would have to use a grind to fit. But if your suggestions work, I’ll just go that route.

 

[NWBLKTAIL]

Just a heads up if you go that route you will have to drill 2 new holes in the #10809 limbsaver as they do not line up

 

[AZ_Hunter]

I have a VG and put a LimbSaver, that fits my Roughtech stock, on it. It is a tiny bit small but not bad.

The “tikka” fit Limbsaver?

https://www.amazon.com/Limbsaver-AIRTECH-PAD-TIKKA-T3X/dp/B07CZCTGBK

 

[TNKnoxville]

I didn't need to drill mine. I used the ones I got for the Tikka Roughtech stock.

 

[svivian]

Backstop Recoil Pad

The Backstop recoil pad is a revolutionary design that is customized to your own rifle's recoil level. It comes with the "throne" protector for storage and has a unique dampening profile. Backstops are made to fit nearly every rifle style.

backfireshop.com

 

[AZ_Hunter]

I didn't need to drill mine. I used the ones I got for the Tikka Roughtech stock.

That didn’t fit mine. Technically it would bolt up, but had a step from the stock to the outside of the pad. Was ugly. Just doing grind to fit now.