Spot Hogg Fast Eddie - Sight Tape Distance?

pingpong7

FNG
Joined
Jul 8, 2016
Messages
60
Location
Idaho
Curious of those who have this sight and are shooting roughly 300 FPS. How far out will your sight tape go assuming no clearance issues with your arrow? If you could please list your FPS and max distance, that would be great! Thanks for the help!
 
Joined
May 6, 2018
Messages
9,730
Location
Shenandoah Valley
Probably too many variables. It will depend on your anchor and a few other things.

I had a Tommy Hogg 5 pin I was shooting 305 fps out to 150 yards if I recall correctly. Didn't use tapes, made my own scale.
 

big44a4

WKR
Joined
Jul 4, 2017
Messages
643
2nd billy goat. Too many other factors. I’ve had a 313 FPS arrow get to 150 but 280-290 are around 115 give my setup.


Sent from my iPhone using Tapatalk
 

Joe Holden

Lil-Rokslider
Joined
Mar 14, 2019
Messages
186
Location
Kansas
Anchor point is a factor. Had a 5 pin Fast Eddie XL with a high 280s/low 290s fps arrow and a pin on to 130. Made my own tape.
 

JBahr

Lil-Rokslider
Joined
May 29, 2016
Messages
281
Everyone is right above, too many variables without knowing all your specs. Anchor point has a lot to do with it, but it's really how your anchor affects your peep height. The shorter the distance between your peep and your arrow the closer the pin will be to the arrow and vice versus. You want to find an anchor that is very comfortable and allow you to have the highest peep sight height. Otherwise at those longer distances your housing will start causing arrow clearance issues.

If you have a 28"+ draw a 300 fps arrow, you should be able to get 100+ yards unless something is way off. I shoot a 29.5" 77lbs 525gr @ 280fps and get 120 yards out of my Fast Eddie. Peep height is 5.25"
 

406unltd

WKR
Joined
Jul 6, 2018
Messages
668
My arrow is moving 273-275fps
I shoot the double pin
I dial and shoot out to 130 with the top pin and have plenty of clearance. This gives me a 140 pin with the second pin.
4 fletch aae hybrid 26
 
Top