I thought of doing the same thing but put the project on pause in hopes someone else would iron out the kinksAlpha makes 25saw for WTO already, one step down with a 273 bushing, and set tension with a mandrel is the plan. Brass was ordered last night, will get some as well as a few 7saw, neck em down, load a bullet, and see if they both jive with a 278 or 279 neck chamber. WTO specs the 25 saw neck at 292, figure 5 thou of clearance, the loaded od is 287, so 6mm version should be 273-274 loaded.
The 25 saw brass is headstamped but still has 7mm neck right?

