Seekins tough enough?

[rratzlaff1490]

Curious on the thoughts from someone who may have personal experience. Are Seekins made well enough for the backcountry of Montana? The reason I ask, is because in 2019 on a backpack hunt, 8 miles deep, I witnessed my buddies rifle “fail” on him with the scope becoming loose on the rail from scope rings constricting from the cold weather and the bolt becoming very sticky. Lows at night were right at zero.I can’t remember the brand of the rifle but it wasn’t by any means a higher end model of anything. That’s stuck in the back of mind my since and question production rifles for the most part expect for a few brands.

I like what Seekins seems to be producing without ever handling one. The element hunter in a 6mm checks all the boxes for me but would you or have you trusted it ??

 

[nobody]

No idea on the Seekins, so I can’t help there. But the story of your buddy sounds more like a failure to mount the optic properly than an all out rifle failure. The sticky bolt was likely from an over oiled action that gummed up in the cold as the oil congealed as well as likely the dust mixing with the oil causing issues.

Oil minimally, if at all, and mount your optic with thread locker at ALL joints, as well as your action screws. At that point your worry will need to turn to trigger reliability in inclement conditions (I’m inclined to lean against Seekins here since they use 700 based triggers, pointing to higher potential for failures), and scope failures.

 

[bmart2622]

My kids has been packed around in a scabbard literally 100s of miles in the mountains of MT over the last couple years and we've never had an issue. Right out of the box there was an issue with the mag not feeding consistently, 1 call to Seekins and a new one was sent out and no issues since. Id definitely buy another one