Seating depth test before powder

[The big greasy]

I’ve been reading some say to do the berger seating depth test before finding a good powder charge. Questions are

1. Seating depth first?
2. Once found, does the seating depth stay good through testing different powders and charges?

 

[wapitibob]

Never, I set .020 off and leave it.

 

[The big greasy]

Never, I set .020 off and leave it.

Even for these fussy vlds?

 

[wapitibob]

Yep, shooting 195's right now in 2 different barrels, .020 off and haven't touched it. I don't have enough barrel life to do much messing around. I did the same with 180 vld's; it never made enough difference for me to continue. Guys swear by it though.

 

[Shooter Mike]

Never, I set .020 off and leave it.

How often do you clean your chamber and barrel?


Sent from my iPhone using Tapatalk

 

[wapitibob]

How often do you clean your chamber and barrel?


Sent from my iPhone using Tapatalk

Cleaned the STW after every range session and when I pulled it to exchange for a 7PRC. Cleaned the PRC after 3 shots, then 10, then at 90 when I switched from 180's to 195s. I pulled that barrel last week at 145 total, and will clean it in a day or so. I put the STW back on, shot 15 today and may leave it dirty and see how it does.

 

[Shooter Mike]

Cleaned the STW after every range session and when I pulled it to exchange for a 7PRC. Cleaned the PRC after 3 shots, then 10, then at 90 when I switched from 180's to 195s. I pulled that barrel last week at 145 total, and will clean it in a day or so. I put the STW back on, shot 15 today and may leave it dirty and see how it does.

That sounds like a very reasonable method. Would you agree that those who don’t clean their rifles until accuracy wanes would be better off with deeper seating depths? The way my mind sees it is, while 0.020 might work great, when that gap erodes, it changes pressure sooner and by a wider margin. That’s me just guessing without really experimenting. That said, with Bergers, I’ve had the best results being much farther off the lands. But it could have just been something with the one barrel I was loading them in. If I remember right, I’m thinking somewhere in the 0.080” range.


Sent from my iPhone using Tapatalk