Ruger Hawkeye predator FTW 6.5CM- project


Rating - 100%
5   0   0
Aug 10, 2014
I'm basically selling the barreled action with factory magazine/ bottom metal, PTG detachable AI bottom metal. The factory stock that is partially inletted for the PTG bottom metal, throwing this in for basically free as I attempted the inlet myself. There is still more that needs to be done but my ADD has kicked in and I'm out of patience. Throwing it in for free because they inlet is not pretty at this point and while still undersized I can't say it won't have some gaps when finished. This bottom metal does eliminate the middle screw in the original configuration.

Selling because I finally came to two realizations. I don't have the patience to do the work myself and buying guns to accomplish multiple goals doesn't work. This rifle hasn't had a single round down the tube. It has been threaded (9/16x24) by Thunderbeast Arms, brake not included. I do have a set of Leupold, medium, 30mm rings that I'll throw in.

Details on the rifle:
-Ruger 77 Hawkeye, CRF, three position safety, full length claw extractor
-Stainless 24" Magnum contour barrel
-Ruger two stage target trigger that is surprisingly good!
-laminated stock that I intended to replace but once the rifle came in I ended up liking. The colors in the stock at much darker than images show.

Included in sale:
-Barreled action, Ruger Hawkeye predator, 6.5CM, threaded 9/16-24
-Original stock semi-inletted for PTG stealth dbm with factory LOP spacers installed
-PTG stealth dbm for Ruger 77
-original Ruger bottom metal
-Leupold 30mm medium height rings for Ruger 77

$600 shipped to your FFL. Your FFL must be able to receive from individual.


Sent from my XT1585 using Tapatalk