Rokstok Lite

[Formidilosus]

I read this as: the Lites are incompatible with the current LOP spacer kit that use the limbsaver pads. They’re all pachmyer grind to fit, with a fixed LOP. So pick something you want to stick with, or get multiple recoil pads with different thicknesses.

Negative. The Lite will have spacers. They are not the same as the ROKStok.

 

[HighUintas]

I read this as: the Lites are incompatible with the current LOP spacer kit that use the limbsaver pads. They’re all pachmyer grind to fit, with a fixed LOP. So pick something you want to stick with, or get multiple recoil pads with different thicknesses.

Nope. Form said the Lite is pachmayr grind to fit and also told me when I directly asked him about the LOP kit, he said to order the LOP kit for it.

So.... It's Pachmayr and the LOP kit will be available and work

 

[atmat]

@Ryan Avery, @Unknown Munitions — Will the RS Lite be released for the T1x as well on Thurs? Or just theT3x?

You can put a t1x in a regular rokstok you just have to extend the notch for the bolt release forward about a half inch. I've been waiting to see a picture of the light on the opposite side of bolt. It seems the rs lite sits lower on barreled action and if the bolt release is above the top of stock line than the t1x will be no problem

I heard back from UM and they said I could order the T3x and request a T1x instead to accommodate barrel contour.

When I asked about the difference in bolt stop they said they didn’t know and I should hold off ordering.

So that wasn’t helpful haha.

 

[PBBananaHammock]

Negative. The Lite will have spacers. They are not the same as the ROKStok.

Nope. Form said the Lite is pachmayr grind to fit and also told me when I directly asked him about the LOP kit, he said to order the LOP kit for it.

So.... It's Pachmayr and the LOP kit will be available and work

Thank you for the clarification. Much appreciated.

 

[JDMBEND]

What are the odds of successfully getting a lite on order Thursday? Especially left handed.

 

[Avin]

Anyone know if the standard barrel channel option will work with the tikka Roughtech contour? Or will I have to go up a size. Also trying to plan my order. Thank you

 

[Schmo]

Anyone know if the standard barrel channel option will work with the tikka Roughtech contour? Or will I have to go up a size. Also trying to plan my order. Thank you

I wouldn’t. Personally, I do Sendero inlet for everything

 

[AZ Gator]

I wouldn’t. Personally, I do Sendero inlet for everything

Same. A fat inlet allows flexibility for different barrels and no/less worries of clearance issues for fit or shooting accuracy.

 

[wyosam]

I heard back from UM and they said I could order the T3x and request a T1x instead to accommodate barrel contour.

When I asked about the difference in bolt stop they said they didn’t know and I should hold off ordering.

So that wasn’t helpful haha.

It took me about 8 seconds to fit a standard Rokstock to my T1x. Just order it.


Sent from my iPhone using Tapatalk

 

[Jermh]

Just here to offer my services to anyone that plans on selling their Rokstock to fund a Lite come Thursday. Happy to help lol

 

[atmat]

It took me about 8 seconds to fit a standard Rokstock to my T1x. Just order it.


Sent from my iPhone using Tapatalk

I’m sure I could do that. But if I can avoid cutting a recess by just buying a T1x, I’d prefer that. We’ll see, game time decision.

 

[MuleyFever]

Just here to offer my services to anyone that plans on selling their Rokstock to fund a Lite come Thursday. Happy to help lol

Well, if they plan on needing a stock for this fall they may not want to sell the one they have now.

 

[PBBananaHammock]

Just here to offer my services to anyone that plans on selling their Rokstock to fund a Lite come Thursday. Happy to help lol

I’ve got 2 and will be selling 1 if I can get an order in.

 

[Avin]

Thanks for the reply’s regarding barrel channel. I’d prefer to have the channel as fitted as possible while still allowing free floating. Has anyone used a veil Roughtech contour in a standard rokstock? Thanks

 

[Schmo]

Thanks for the reply’s regarding barrel channel. I’d prefer to have the channel as fitted as possible while still allowing free floating. Has anyone used a veil Roughtech contour in a standard rokstock? Thanks

The Roughtech contour is too fat. Get the one that’s inletted for a 3B.

 

[260284]

Yea I’ve been keeping a close eye on that thread. We’ll see. I won’t be shooting my 18” 7PRC out of it.

I’m hopeful for something like the Silencer Central Banish Speed K Ti. Just not from SC…

A friend just had his come apart while calling coyotes. Has only been used on a 20" 6 creed.

 

[260284]

What about the Exo guys?

They are using the Airlock cans.

 

[Speaks]

Thanks for the reply’s regarding barrel channel. I’d prefer to have the channel as fitted as possible while still allowing free floating. Has anyone used a veil Roughtech contour in a standard rokstock? Thanks

They sand out super easy. Could get a sporter and just sand to suit your taste.

I opened all mine to sendero in under 10 min.

 

[PBBananaHammock]

They sand out super easy. Could get a sporter and just sand to suit your taste.

I opened all mine to sendero in under 10 min.

Ive never sanded carbon fiber. Will that compromise the carbon fiber layout or the epoxy holding it together?

I’m not sure if UM/Stockys uses one barrel channel and hogs them out or if it’s a different mold for each barrel channel.

 

[gtriple]

They are using the Airlock cans.

Yea, that post was almost a year ago.