Rifle ice/snow freeze eval 2025

[Formidilosus]

I just checked all my crf actions. With the M77s the rim doesn't slide underneath the extractor until about halfway through pushing the bolt closed, and it's nowhere near completely underneath the extractor -just enough so that if I started pulling the bolt back it would pull the cartridge with it. The cartridge is not fully seated underneath that extractor until about the last 15% of closing the bolt. Is this what you're talking about?

Properly timed, the rim slips under the extractor the instant it releases from the feed lips.

Whatever the situation might be, I'm guessing @longrangelead could fix/improve it?

He ain’t no goo…. He could probably fix it, yes.

Grin

 

[1000yards]

Properly timed, the rim slips under the extractor the instant it releases from the feed lips.

Ok, I actually see what you mean now. Out of more than 10 rifles, I have ONE that does that properly -an original HVA 1640. Thank you for the explanation.

 

[1000yards]

@longrangelead That is an exceptional explanation with all the pictures and everything -thank you.

 

[nephewjephew]

@Formidilosus @longrangelead
Is there anyway to make a M70 DMB like the Marshall?

 

[Formidilosus]

@Formidilosus @longrangelead
Is there anyway to make a M70 DMB like the Marshall?

You’re looking for a DBM bottom metal for an M70?