billysmals
WKR
- Joined
- Feb 26, 2023
- Messages
- 872
For Sale:
Bowtech Revolt X: RH, 33in ATA, 60-70lbs, Sniper Gray Color, 85% let off: Currently set at 27.5in draw length
Bowtech Revolt X: RH, 33in ATA, 60-70lbs, Sniper Gray Color, 85% let off: Currently set at 27.5in draw length
Wear: This was my primary bow for a few years before it became the backup bow. There is some annodized marks/wear in various places. I took pictures of what I could find, there may be a little more than what I pictured. Most wear is on the riser shelf. A few marks on the cam edges. There is a set screw mark by the rest. The orbit dampners have some wear from coming on and off. There is likely some wear under the grip, sight bar, or rest from coming on and off, but I can't confirm this.
Additionals: Upgraded Lucky Draw Stops- Luck Pro pack with 2 different sets of draw stops of two different sizes. Lucky draw stops are aluminum and firm up the back wall and allow you to adjust the let off and draw length with out changing the module. There many videos on this and I won't go into depth here. Each set is a different size with 4 different positions on each stop to create a customizable draw length and let off. The bigger the size the lower let off and the shorter the draw length. Currently this is set on one size up from stock (two dot), to shorten the draw length 1/8in and increase the let off to 82% ish. 1 dot setting is the stock setting that will match what bowtech sends from factory.
Clutch Grip: Original stock grip in black. Extra clutch grips in tan color x2 with matching orbit rubber in tan as well as the original gray rubber inserts. One of the tan grips is the stock profile and one has a 1/4in raised heel for a slightly higher grip angle-this is what is installed on the bow currently. The grips just pop on and off if you like the stock profile.
Hitek Sandtrap String Stop: Replaced the original cheap one from bowtech with one from Hitek. Better vibration dampnening compared to the original.
Original stock string and cables.
Extra string: This was put on hardly shot as one strand was singed when installing the peep. It worked fine, but I didn't like that it had a strand singed so I replaced it. This is a great backup string with an install D-Loop in case something happen to the current string.
Sims Split Limb Silencers: These screw on and off for silencing and vibration dampening
QAD HDX drop away arrow rest
Redline RL-2 5pin Bow Sight: Dovetail mount, .19 pin size. This has 2nd and 3rd axis adjustment. Comes with all mounting hardware and sight light. I never used the sight and never tested it. No batters are included. Only one sight tape was used. There are some gold sharpie marks on the mounting bracket and dovetail bar just for reference incase the sight moved. This will likely wipe of with acetone/nail polish/alcohol wipes.
Bowtech Airlock Quiver Riser Mount: This is the riser mount from the airlock quiver series. You can mount a tight spot or air lock quiver to it and move the quiver off the normal sight mount location. ONLY THE MOUNT IS INCLUDED. If you want the pictured Tight spot we can talk about a deal for it as well. I included pictures of it to demonstrate how close the quiver can be mounted for reference only.
Kuiu stickers x2
Not included but pictured: Peep, nose button, stabilizer quick disconnect, Tight spot quiver.
I tried to take pictures off all wear/damage. The strings have a lot of life in them. It looks like there might be some early serving separation-see pictures.
Price: $650 shipped which includes everything accept for the Peep, Nose, button, Stabilzer quick disconnect, and tight spot.
If you don't want some of the accessories contact me and we can try to work out a deal or if you want it all and the tight spot.
Paypal or venmo. You pay extra 3% for G & S if you want it! (I will refund your money if you don't not include the 3% additional)
Thank you!
