Reloading for Thompson encore

[Rydinef]

New here on rokslide.
My question is about reloading for Thompson encore. I’m new to reloading as a whole (what gifted a press and the bare necessaries. I’m currently set up for 308 and 6.5 cm. My question is regarding the 6.5. It’s a mgm encore barrel, and was wondering if any special care needs to be taken when it comes to encores vs bolt actions? Best ways to looks for pressure, etc.
thanks

 

[Axlrod]

Welcome!
The Encore platform usually won't handle quite as much pressure as a bolt gun. But they will handle anything equal to factory loads.
I have been loading for Contenders and Encores for a long time. The very best resource is Mike Bellm @Bellmtcs.com. There is a very large amount of information under "Tech Support Index" on his web site. This link is just one of them:

How To Make The Encores and G2s Work

Bellm also sells all the parts to make the T/C guns work correctly. His prices are fair and he has very good instructions with everything. Feel free to post any questions you have, I will try to help.

 

[Rydinef]

Welcome!
The Encore platform usually won't handle quite as much pressure as a bolt gun. But they will handle anything equal to factory loads.
I have been loading for Contenders and Encores for a long time. The very best resource is Mike Bellm @Bellmtcs.com. There is a very large amount of information under "Tech Support Index" on his web site. This link is just one of them:

How To Make The Encores and G2s Work

Bellm also sells all the parts to make the T/C guns work correctly. His prices are fair and he has very good instructions with everything. Feel free to post any questions you have, I will try to help.

Thanks for the info. Been reading through the different articles and they’ve cleared up quite a bit!