Quality rings on a budget?

[Sled]

I've been using my talley rings for so long that i've ditched all of my weaver/picatinny rings. now i'm in need of some for my 300 wby with a 1 piece 20 moa base. there's a lot out there to choose from but if your budget was about $40-$75 what would you say is adequate these days for picatinny rings? i've been one of the lucky ones who have never had a poor mount go awry and i'd like to keep it that way. Thanks for your suggestions.

 

[mt100gr.]

What scope are you planning to use?

 

[Spoonman]

Warne rings are pretty good for the price.

 

[Fatcamp]

SWFA on a EGW rail? Bed it, lap it, and torque it. Something I would trust.

 

[Sled]

What scope are you planning to use?

30mm tube. it's my older 1st gen vortex pst 4-16. it'll be on an egw 20moa rail

still need to do the math to see if i can run low rings or if i have to use mediums

 

[XLR]

I've been using my talley rings for so long that i've ditched all of my weaver/picatinny rings. now i'm in need of some for my 300 wby with a 1 piece 20 moa base. there's a lot out there to choose from but if your budget was about $40-$75 what would you say is adequate these days for picatinny rings? i've been one of the lucky ones who have never had a poor mount go awry and i'd like to keep it that way. Thanks for your suggestions.

We have had great success with our rings, precision machined aluminum with a steel lock plate and hardware. For 30mm optics we offer a 'medium' at 1.18" and a 'high' at 1.46". Check them out HERE and let us know if you have any questions.

 

[archp625]

Ill agree with another post, Warne rings are hard to beat for the price. I have 3 sets and have never failed me.

 

[Relentless]

I've been using my talley rings for so long that i've ditched all of my weaver/picatinny rings. now i'm in need of some for my 300 wby with a 1 piece 20 moa base. there's a lot out there to choose from but if your budget was about $40-$75 what would you say is adequate these days for picatinny rings? i've been one of the lucky ones who have never had a poor mount go awry and i'd like to keep it that way. Thanks for your suggestions.

Warne.

 

[Ndbowhunter]

Swfa rings are cheap and hold zero.

Warne steel rings have done great as well.


Xlr rings are pretty heavy for being only 4 screws.

For 70$ I'd squeeze for some warne mountaintechs at 100$.

 

[tdhanses]

For $125 hard to beat Hawkins. Might even find them cheaper.

 

[Sled]

i ended up with a set of xlr's for about $45. they are a little heavy but for this rifle that's not a bad thing. i like the flush side mount and the screws actually look like you can torque them down. by that i mean you don't need to go to a jeweler to get replacement screws if you lose one. i'm excited to give them a try. fwiw, they are a little high compared to others i've used. the lows are closer to a medium and slightly tall. they fit my mark v with a 20 moa rail and 50mm bell housing with plenty of room to spare.

thank you to all that replied