Pulk attachment to Duplex frame

[sveltri]

I'm planning on building a pulk to use while coyote hunting in the winter, and I'm wondering if anyone has a good way to attach to a Kifaru frame. I know I could probably just attach with carabiners to the webbing on the belt, but wondered if there was a better way that wouldn't stress the stitching as much.

 

[rclouse79]

I tied a loop through multiple webbing holes and hooked the carabiner to that. I haven’t used it a lot yet, but it seems solid.

 

[reaper]

I tied a loop through multiple webbing holes and hooked the carabiner to that. I haven’t used it a lot yet, but it seems solid.

X2



Envoyé de mon Pixel 4 XL en utilisant Tapatalk

 

[Voyageur]

I'm planning on building a pulk to use while coyote hunting in the winter, and I'm wondering if anyone has a good way to attach to a Kifaru frame. I know I could probably just attach with carabiners to the webbing on the belt, but wondered if there was a better way that wouldn't stress the stitching as much.

I don’t think there will be enough friction pulling your pulk to worry about stressing any of the stitching, especially when you’re pulling it over snow. The attached link explains the method I used for my pulk. It sounds like you are contemplating something very similar. Hope this helps

Hill People Gear | Pulk Instructions

How to create a budget winter workhorse.

hillpeoplegear.com

 

[reaper]

I'll try to take some pictures tonight on how I use mine on an omni belt


Envoyé de mon Pixel 4 XL en utilisant Tapatalk

 

[reaper]

I'm planning on building a pulk to use while coyote hunting in the winter, and I'm wondering if anyone has a good way to attach to a Kifaru frame. I know I could probably just attach with carabiners to the webbing on the belt, but wondered if there was a better way that wouldn't stress the stitching as much.

Here you go
Hang by the molle webbing and secure by a second webbing from the omni belt.

If you only use the molle webbing with time it will wear out,it's better with a strap around the belt and you can pass it into the molle on the belt and attach carabiners

Envoyé de mon Pixel 4 XL en utilisant Tapatalk

 

[Voyageur]

@reaper
What brand pulk is in your pictures?
Thanks.

 

[reaper]

@reaper
What brand pulk is in your pictures?
Thanks.

It's a pelican 66x22 with DIY attachment and aluminium tracks and removable fins,that thing is really nice.

Envoyé de mon Pixel 4 XL en utilisant Tapatalk

 

[reaper]

@reaper
What brand pulk is in your pictures?
Thanks.

Mega Utility Glider is the model name

Envoyé de mon Pixel 4 XL en utilisant Tapatalk