Pin Colors

[Florida Mike]

Yellow
Green
Yellow
Green

As you guys get older your gonna find the RED gets tougher to see in low light. Good hunting, Mike

 

[BackcountryBull]

I currently use a .010 single pin in green. But I have been considering switching to blue.

 

[Elk_Addict23]

.029 Red
.019 Green
.019 Red
.10 Green
.10 Red

 

[Rent Outdoor Gear]

Most 3D guys running blue fiber utilize an adjustable light to supplement the brightness for different conditions. I wouldn't want to deal with that on a hunting rig...

The human eye is tuned to see green better than other colors that's why it appears brightest. I use green yellow and red pins, but you can extend the length of fiber on the other colors to make them brighter if you buy replacement fiber.

Coop

 

[Evan Williams]

I just pulled two of my pins out of my CBE Tek and am now running:

.029 -- green
.019 -- red
.019 -- green

I am going to leave the blue out of it and run a blue in my 3D rig on the Vector Turbo when she gets in.

 

[Chuffness]

Where are you guys getting the blue pin ?? Im trying to find a .010... and no one seems to have access to one.

 

[HellsCanyon]

Like others I have a red 010 pin with two green above and two green below. All .010" and I actually just replaced all new fiber and pins with the new bulletproof pins from spotHogg with a sight light. Loving it!

 

[HellsCanyon]

Where are you guys getting the blue pin ?? Im trying to find a .010... and no one seems to have access to one.

Here ya go! I just bought all my new fiber from this company and had it to my door 5 days later... super cheap and good product too!
http://www.fiberopticproducts.com/Archery.htm

Mike

 

[mtbshark]

cant see the yellow
19 green
19 red
10 green
10 red
10 green

i think i might change the second 19 to a 10

 

[dreamingbig]

I am liking my 5 pin set up on my hunter hogg it:

1 .029 green 20yd
2 .010 red 30yd
3 .010 yellow 40yd
4 .010 green 50yd
5 .010 green 50yd

I went with red for the 2nd/30yrd pin as it is the most common range I am putting a pin on an animal. I am thinking "red is dead" when I am doing that so it gets me in the right head space. Yellow for the 3rd pin is a good break before green for the longer pokes. I can see yellow well enough in dark timber for it to not be an issue. Green is my top pin because in low light situations the shot is going to have to be close for me to take it and at that point I want the largest and brightest pin available.

 

[Chuffness]

Here ya go! I just bought all my new fiber from this company and had it to my door 5 days later... super cheap and good product too!
http://www.fiberopticproducts.com/Archery.htm

Mike

Sweet ! Thanks man.

 

[Chuffness]

Good find. I just placed my order. It was cheaper than what I found at the local shops plus blue and more fiber.

 

[Brandon Pattison]

29 red
19 green
19 yella
19 red
10 green
10 yella
10 red

 

[Pond]

I don't see the red very well either. I run stock combo from Spot Hogg. When I buy another site from them I'll custom color yellow 20, green 30, yellow 40, green 50, red 60, red 70, red 80. The reds should be my reminder not to shoot animals that far but still usefull for 3D. My current 7 deadly pin site has a white sticker on the 50 to make finding the right pin faster.

 

[Jared Bloomgren]

6 pins now.

.019 Green
.019 Yellow
.019 Red
.010 Green
.010 Yellow
.010 Red

 

[barmar65]

5 pin all green red fuzzes out on me.

 

[keep]

I've been shooting this config and would change the .29 to .19 for 20&30 yds then 50 and up all .10

.029 - Green
.029 - Yellow
.019 - green
.019 - red
.019 - green
.010 - yellow
.010 - Green

 

[Lawnboi]

.019 green
.019 green
.010 green
.010 green

My eyes can see green much better than any other color. Takes some getting used to to use all one color though