WTS PBB Carbon Defiance 6.5 GAP barrel / Defiance Mag bolt and components

83cj-7

WKR
Rating - 100%
42   0   0
Joined
Dec 26, 2020
Messages
1,319
Location
West Virginia
Thinking of selling my Preferred Carbon barrel chambered in 6.5 GAP 4s. This is a Defiance pre-fit. It is 19”, 8 twist and threaded 5/8-24. It has 218 rounds through it and has been very accurate and easy to clean.

The Defiance bolt is a short action nitrided and has about 400 rounds on it. Face is perfect and it’s super slick in an action.

Hawkins mag has been massaged to flawlessly feed the GAP/SAUM cartridge. I didn’t feed worth a crap when I got it and I have carefully modified the follower and the feed lips to feed and not scratch brass.

I also have 290+ pieces of once fired and sized Hornady Gen 3 GAP 4s brass. It has been turned and annealed and is ready to load.
-The Cerakote on the parts is as close as you can get to Nightforce Dark Earth.
-I will not sell any other components separately until the barrel sells.
-Scope pictured is for color reference.
-Groups pictures are at 400 yards.

Barrel only $700
Barrel with everything else $1400
 

Attachments

  • IMG_4344.jpeg
    IMG_4344.jpeg
    1.1 MB · Views: 5
  • IMG_4346.jpeg
    IMG_4346.jpeg
    804.2 KB · Views: 4
  • IMG_4345.jpeg
    IMG_4345.jpeg
    606.2 KB · Views: 3
  • IMG_4347.jpeg
    IMG_4347.jpeg
    405.8 KB · Views: 3
  • IMG_4348.jpeg
    IMG_4348.jpeg
    662.4 KB · Views: 4
  • IMG_4349.jpeg
    IMG_4349.jpeg
    992 KB · Views: 4
  • IMG_4220.jpeg
    IMG_4220.jpeg
    720.4 KB · Views: 4
  • IMG_4239.jpeg
    IMG_4239.jpeg
    768.5 KB · Views: 3
  • IMG_4181.jpeg
    IMG_4181.jpeg
    826.1 KB · Views: 4
Back
Top