New TMK announced

[ddowning]

If you throat it long enough, you will easily get 2800 fps with h1000 unless you have a very slow barrel. There are other powders that will give even better velocity, but h1000 is very low pressure with a full case, so no drama, good speeds, and long barrel life. Accuracy tends to be good with either a CCI 250 or sometimes it needs a 200. The 250 have typically shot better for me though, especially in colder temps.

 

[Chris in TN]

Midway says coming mid February:

 

[khuber84]

Perfect bullet for my 20" 6gt!

 

[KyleR1985]

 

[TxLite]

Has the 185 7mm been tested at all to verify g7? Or at least ballpark. Wondering how it compares to the 180 hybrid

 

[waspocrew]

Man, I haven't really had the chance to crack into the 95 TMKs I bought during the last feeding frenzy... now I'm going to be looking for those 116s haha.

Those pushed me over the edge, will be going with a 6 PRC. Just need to get a barrel ordered here soon.

 

[Schmo]

Man, I haven't really had the chance to crack into the 95 TMKs I bought during the last feeding frenzy... now I'm going to be looking for those 116s haha.

Those pushed me over the edge, will be going with a 6 PRC. Just need to get a barrel ordered here soon.

Do it my man! Love the 6 PRC

 

[Hooskerdrew]

Just got an in-stock notification for the 107s at midway. Let the race begin. 500 packs only

 

[BjornF16]

Better check 6.5 vs 6mm

I show 6mm (.243) as “Coming Soon”

 

[Hooskerdrew]

 

[deer_hunter132]

at .50cpr i think i will wait to hear some more feedback, esp a 500ct lol

 

[BjornF16]

Disregard…I had Qty 100 selected.

Just made an order for 500

 

[khuber84]

Well there goes my fun money for the month!

 

[BjornF16]

Anyone know if there is much difference in bearing surface area between the 107 TMK and 108 ELD-M?

 

[nm.otter]

$6 per pound copper is killing us.

 

[Ope]

100cts available on Midway now

 

[khuber84]

Anyone know if there is much difference in bearing surface area between the 107 TMK and 108 ELD-M?

In comparing a 107smk VS a 108eldn, there is a larger difference in bearing. Hard to say on this 107tmk. Everyone said the 115-117 tmk was gonna have a lot of bering, but it doesn't, it's closer to a 109 Berger, which is less than a 108 or 109 eldm.

 

[Willie IV]

100cts available on Midway now

I just picked up a 100 count. Thanks for the heads up!!!

 

[JohnsIsl]

I think I read somewhere in this thread that the 22 cal 88s will NOT stabilize in a 1:8. Is that accurate or did I dream that?

 

[Formidilosus]

I think I read somewhere in this thread that the 22 cal 88s will NOT stabilize in a 1:8. Is that accurate or did I dream that?

In 223 at -3000ft DA, they did not. At 4,000ft DA- they did. In 22CM I think they will be fine.