New Bergara 300 PRC load discussion

[FireNelk]

Just Bought the Bergara B-14 HMR Wilderness in 300 PRC. Super excited to get to work on it.

 

[FireNelk]

Hit the the post before I was ready.
Anyway looking at some load data. Any one have load builds they really like for this rifle. Would love to hear

 

[212pilot]

Following as I just ordered a 300 prc.
Defiance ruckus with proof sendero 1:9. Excited to get shooting!

 

[Altoonabcm157]

I load 75.5 grains of h1000 in hornady brass and a 225 eldm. Shoots very well in my bergara HMR wilderness.

 

[PineBrook413]

I've got a killer load worked up for my Bergara B14 wilderness ridge.
ES/SD single digits and consistent 1/2 moa accuracy 3 shot groups.

.020 off lands, Hornady Brass, cci 250 primers, 220 eld-x bullets, reloader 26 & Ramshot magnum have been great powders. Will get actual charge weights in an hour or so when I get down to the reloading room.

 

[PineBrook413]

Best load with RL 26 74.3 grains
Best load with ramshot magnum 78.9


Sent from my iPhone using Tapatalk

 

[FireNelk]

Best load with RL 26 74.3 grains
Best load with ramshot magnum 78.9


Sent from my iPhone using Tapatalk

Thank you for the info. Finally found some RL26.

 

[212pilot]

I load 75.5 grains of h1000 in hornady brass and a 225 eldm. Shoots very well in my bergara HMR wilderness.

How many reloads are you getting out of the hornady brass? That’s seems to be the most difficult component to source right now.

 

[PineBrook413]

How many reloads are you getting out of the hornady brass? That’s seems to be the most difficult component to source right now.

So far I'm at 5 reloads. I assume I'll get 7 based on the condition of the brass after 5. Out of 100 pieces of brass I've found 5 with a loose primer pocket that I threw in the trash. You can tell when de-priming if its a little loose.

 

[212pilot]

So far I'm at 5 reloads. I assume I'll get 7 based on the condition of the brass after 5. Out of 100 pieces of brass I've found 5 with a loose primer pocket that I threw in the trash. You can tell when de-priming if its a little loose.

Awesome, thanks for the info!

 

[PineBrook413]

Awesome, thanks for the info!

Happy to help! Good luck

 

[FireNelk]

Thank you for the info. Finally found some RL26.

Finally got to go out and do some load test. Getting my best results with RamShot Mag and RamShot LRT.
Both shooting the 200gr ELD-X
Loading up a few more to dial in on one load.