My OG is out of jail!!!

[Mtaylor]

First time suppressor owner. Just got my OG out of jail today! I’m dying to go shoot with it.
I just converted my 7 rem mag to 6.5 PRC, that will be the primary rifle it resides on, and also a 243 my son uses to hunt with.
Both guns are threaded 1/2x28, I have the UnownMunitions adapter and wrench for it. Do I need to add any anti seize or anything to the threads or just leave it dry?

 

[LongWayAround]

I just screwed mine on and started shooting it.

It's also my first suppressor so take that for what it's worth...

 

[wind gypsy]

First time suppressor owner. Just got my OG out of jail today! I’m dying to go shoot with it.
I just converted my 7 rem mag to 6.5 PRC, that will be the primary rifle it resides on, and also a 243 my son uses to hunt with.
Both guns are threaded 1/2x28, I have the UnownMunitions adapter and wrench for it. Do I need to add any anti seize or anything to the threads or just leave it dry?

I haven't traditionally added any anti-seize but my OG65 got real crusty on there with Ti dust initially from the 3d printing process. I put some grease on the threads and screwed in on/off a handful of times then used parts cleaner to spray the grease(and collected ti dust) off the muzzle and the threads inside the can. Then flushed everything with water. That seemed to do the trick.

 

[2buffalo]

You don't need anti seize until you do. And when you do it will cost you a suppressor. It is cheap insurance.