Modern, short action 7mm

Joined
Oct 4, 2024
Messages
18
In this day and age of "new" cartridges being introduced all the time, I am surprised that we haven't seen a modern, short action, magnum bolt face 7mm. I'm thinking about something that has an COAL of 2.995" and is optimized for 150 - 170 grain bullets. The 6.8 Western is obviously pretty close, but hasn't caught on and has limited factory support.
Anyone have a guess why this is? The 7mm SAUM has a cult following but no factory support. The .284 Win was pretty versatile but ahead of it's time. 7 mm-08 is pretty awesome but lacks horsepower for heavier bullets. People love the balance of the .280 AI; I suspect it's ballistics could be reproduced in a short fat case.
Obviously there are several great 7s out there, but seems like there is still a hole to be filled. Curious what you have to say, thanks.
 
7mm Sherman Short sounds like what you are looking for. I’m in the process of building one now. Not a factory round but headstamp brass is available.
 
Yep that's a great round too. But it's not one the the average shooter can take advantage of since it requires handloading. I am wondering why Hornady / Federal / Winchester hasn't felt the need to provide something off the shelf.
 
Yep that's a great round too. But it's not one the the average shooter can take advantage of since it requires handloading. I am wondering why Hornady / Federal / Winchester hasn't felt the need to provide something off the shelf.
It'll be Federal. Peak alloy case. Standard bolt face. It'll be called the 7mm Front Range.
 
In this day and age of "new" cartridges being introduced all the time, I am surprised that we haven't seen a modern, short action, magnum bolt face 7mm. I'm thinking about something that has an COAL of 2.995" and is optimized for 150 - 170 grain bullets. The 6.8 Western is obviously pretty close, but hasn't caught on and has limited factory support.
Anyone have a guess why this is? The 7mm SAUM has a cult following but no factory support. The .284 Win was pretty versatile but ahead of it's time. 7 mm-08 is pretty awesome but lacks horsepower for heavier bullets. People love the balance of the .280 AI; I suspect it's ballistics could be reproduced in a short fat case.
Obviously there are several great 7s out there, but seems like there is still a hole to be filled. Curious what you have to say, thanks.
The 6.8 Western is more than "pretty close" to what you are asking about for a factory cartridge. If you want custom you could do a 7mm Western.
 
I’ve never really seen the draw to short action magnums. To me I want a short action for a light rifle and if it’s light I want manageable recoil. I have a cut down Kimber hunter in 280AI that is 7lbs scoped with a HST. I’m actually going load 120gr bullets to make a laser gun for deer and predators inside of 500. With a 16” barrel I should still be north of 3Kfps, it will eventually wear a small can too. I could go lighter and shoot a 168gr bullet like my LR 280AI but for what I want a light rifle for there is no real advantage.
 
I've read of some people necking up 6.5 prc to 7mm. Could be a good setup, though I know nothing about it. I like my 284 win and get pretty good performance out of it in my opinion.
 
Winchester should get their heads screwed on straight and re-release the 7WSM...best of the WSMs, just ahead of its time.

I like your username, I've got my first 6.5x284 in the works at this very moment
 
I think companies need the new shiny thing to sell. We saw modern 30 cal mags, modern 6.5 short action mags, a 6.8 short action mag among others. Putting lipstick on something and calling it a new cartridge is tough proposition from a marketing and sales standpoint. If Hornady for example came out with a 7 PRC that had a max coal around 2.950", that would be tricky. It would basically be a rebranded 7 SAUM that would inherently be slightly slower than what the 7 PRC ended up being. A lot of guys nerd out on ballistics and rush to the store to pick up a new rifle that, on paper, outruns or has a feature set that compromises in a different direction than what their current setup has. At the end of the day these company's create new items to drive sales and volume is what keeps the lights on. A short action 7 mag would get beat up as the 7 SAUM has pretty much maxed out the performance of a 2.955" magbox.

If a marketing machine like Hornady released the 7 SAUM 20+ years ago instead of Remington, who managed to cripple one of the most iconic firearm brands in history, the 7 SAUM following wouldn't be a cult made up of reloaders and custom gun builders.

The 7 SAUM has ADG support, great bullet options and runs well with H4350, H4831 and H1000. Not sure there is much left to improve on, maybe ackley improve it if the pressure allows.
 
That's an incredibly specific answer haha. Just a wild guess or do you have an inside scoop?
Just tongue in cheek. Being shorter, it'll have less range than the 7mm backcountry.

However, I would suggest it would be their next logical move to do a short action cartridge next in that lineup
 
Back
Top