All stocks include shipping to the lower 48 and payment is by PMO or Venmo/PayPal F&F only
Pics are lower in the listing. More can be provided to serious buyers.
Cross listed on SnipersHide as well
#1: EDGE fill Game Warden
Matte clear coat
Specifically cut for a Defiance Deviant LA RH but will fit and 700LA RH clone
Bartlien CF M24 barrel channel inlet
Hawkins M5 DBM inlet
2 locking left sided flush cups
1” decelerator
See build sheet picture for any clarification
$650
#2: New Manners MCS-T2A
Elite Tac carbon fiber
ARC Nucleus/R700 clone inlet
Rem Varmint barrel inlet
Badger M5 DBM inlet
2 left side, non rotating flush cups
2 right side, non rotating flush cups
1” Pachmayer Decelerator recoil pad
Custom clear/orange color scheme from Manners
Machined aluminum pillars included
$1000
#5: Accuracy International AT
700 short action, right hand, non folding.
Probably the coolest custom Cerakote job you have ever seen.
Or the ugliest.
Yes, this was part of a rifle that MadBum once reposted on social media. It wasn’t owned by him, I’m the original owner.
All hand stenciled from the master at Custom Gun Coatings.
Perfect condition.
Was used on a 223 setup for my ex wife. She’s gone, the chassis is still here.
$1300 shipped conus.
#7: GRS Bolthorn Folding Chassis
Howa 1500 SA RH
Mag latch has been filed down to fit AICS pattern mags, if it doesn’t latch correctly for you I am sure GRS can source you a new one.
$650
#8: Ashbury Precision Ordnance
700 LA RH
This is a APO prototype chassis for a DOD contract that was never released to the public. It was called their Mark 13 chassis and is very similar to their current line of chassis with a unique, heavy duty, quick adjustable folding buttstock.
Carbon fiber handguard with 3 different pic sections
25 and 60moa full length rails and the adapter from a 700LA to the rail
Rear monopod and single pic section
No scope base screws or action screws provided.
The stock had a Limbsaver recoil pad on it that has cosmetically melted, I removed it and replaced with a 90% matching Limbsaver grind-to-fit pad that is slightly oversized. I will include the original as well as a template, but if i didn’t mention it you probably would have never noticed.
$1300
#9:
Black JAE-100 M14 chassis.
Gen I
Forward pic rail.
All accessories and hardware in pics included.
$700
Pics are lower in the listing. More can be provided to serious buyers.
Cross listed on SnipersHide as well
#1: EDGE fill Game Warden
Matte clear coat
Specifically cut for a Defiance Deviant LA RH but will fit and 700LA RH clone
Bartlien CF M24 barrel channel inlet
Hawkins M5 DBM inlet
2 locking left sided flush cups
1” decelerator
See build sheet picture for any clarification
$650
#2: New Manners MCS-T2A
Elite Tac carbon fiber
ARC Nucleus/R700 clone inlet
Rem Varmint barrel inlet
Badger M5 DBM inlet
2 left side, non rotating flush cups
2 right side, non rotating flush cups
1” Pachmayer Decelerator recoil pad
Custom clear/orange color scheme from Manners
Machined aluminum pillars included
$1000
#5: Accuracy International AT
700 short action, right hand, non folding.
Probably the coolest custom Cerakote job you have ever seen.
Or the ugliest.
Yes, this was part of a rifle that MadBum once reposted on social media. It wasn’t owned by him, I’m the original owner.
All hand stenciled from the master at Custom Gun Coatings.
Perfect condition.
Was used on a 223 setup for my ex wife. She’s gone, the chassis is still here.
$1300 shipped conus.
#7: GRS Bolthorn Folding Chassis
Howa 1500 SA RH
Mag latch has been filed down to fit AICS pattern mags, if it doesn’t latch correctly for you I am sure GRS can source you a new one.
$650
#8: Ashbury Precision Ordnance
700 LA RH
This is a APO prototype chassis for a DOD contract that was never released to the public. It was called their Mark 13 chassis and is very similar to their current line of chassis with a unique, heavy duty, quick adjustable folding buttstock.
Carbon fiber handguard with 3 different pic sections
25 and 60moa full length rails and the adapter from a 700LA to the rail
Rear monopod and single pic section
No scope base screws or action screws provided.
The stock had a Limbsaver recoil pad on it that has cosmetically melted, I removed it and replaced with a 90% matching Limbsaver grind-to-fit pad that is slightly oversized. I will include the original as well as a template, but if i didn’t mention it you probably would have never noticed.
$1300
#9:
Black JAE-100 M14 chassis.
Gen I
Forward pic rail.
All accessories and hardware in pics included.
$700
Last edited:
