tak
WKR
- Joined
- Jan 10, 2021
- Messages
- 397
Here's my long action.
Weighs about 2 lbs and 3-4 oz. (Not sure how accurate my scale is). I have a BT15 front pic rail, and 4 other flush cups, so that weight is probably close for a long action with a little extra hardware.
It is 12 inches from the action screw to the absolute front of the fore end. You could mount a universal 10" rail easily, but if they made an integrated full length arca it could be nearly 12 inches.
The cheek piece comes with the spacers installed and is up 1/2". I measured this before I took the cheek piece off and that adds up. Once off, there are 3 spacers. One is 1/4" and the other two are 1/8". So the cheek piece can be set anywhere from 0 to 1/2" in 1/8" increments. I put the 1/4" spacer in and re-installed for the other picture.
My only slight annoyance is the CF on bottom of the mag well area doesn't come all the way forward to the arca plate. This just seems to be a discrepancy between the short action and long action versions. See picture. Not a huge deal, I'll have to see how it looks with the bottom metal in.
Weighs about 2 lbs and 3-4 oz. (Not sure how accurate my scale is). I have a BT15 front pic rail, and 4 other flush cups, so that weight is probably close for a long action with a little extra hardware.
It is 12 inches from the action screw to the absolute front of the fore end. You could mount a universal 10" rail easily, but if they made an integrated full length arca it could be nearly 12 inches.
The cheek piece comes with the spacers installed and is up 1/2". I measured this before I took the cheek piece off and that adds up. Once off, there are 3 spacers. One is 1/4" and the other two are 1/8". So the cheek piece can be set anywhere from 0 to 1/2" in 1/8" increments. I put the 1/4" spacer in and re-installed for the other picture.
My only slight annoyance is the CF on bottom of the mag well area doesn't come all the way forward to the arca plate. This just seems to be a discrepancy between the short action and long action versions. See picture. Not a huge deal, I'll have to see how it looks with the bottom metal in.
Last edited: