Making 7mm-08 brass

[Dark timber]

Since I can’t find any quality 7mm-08 brass, would you guys size up from 260 or down from 308? I will be using either Lapua or Peterson and it’s a factory TIkka rifle.

thanks

 

[bhylton]

where are you located?

 

[Dos Perros]

I myself would size down and neck turn. I did that on 30-06 to 25-06 with good results.

 

[Dark timber]

I’m in western WA.

 

[MThuntr]

Starline is taking orders with shipment set for end of April if you can wait. I've had an order pending with them since December

If not I'd say size down (be sure to keep the lube on the neck and avoid as much as you can at the shoulder) and neck turn if necessary

 

[Dark timber]

I myself would size down and neck turn. I did that on 30-06 to 25-06 with good results.

I was thinking about going that route, especially since 308 is pretty much the cheapest, as well.

 

[Dark timber]

Starline is taking orders with shipment set for end of April if you can wait. I've had an order pending with them since December

If not I'd say size down (be sure to keep the lube on the neck and avoid as much as you can at the shoulder) and neck turn if necessary

I saw that and got excited, knowing how good their pistol brass is, then I read reviews on their rifle brass. It seems to be middle of the road, according to quite a few reviews.

 

[tt_johnsclist]

I myself would size down and neck turn. I did that on 30-06 to 25-06 with good results.

This^ it was easier than I expected when I did 30-06 to 25-06.

 

[Gilkj4]

308 will probably all be easier to find.

 

[Lawnboi]

Lapua 7mm-08 Remington Brass Bag of 100 | Powder Valley Outdoors

Lapua 7mm-08 Remington case is a superb choice for high power silhouette rifle competition shooters.

www.powdervalleyinc.com

Merry christmas

 

[wyosam]

I bought some Alpha last week, Lapua pops up pretty regularly.


Sent from my iPhone using Tapatalk

 

[Dark timber]

Shortly after starting this thread, I bought some Lapua .308 and sized them, then found some 7mm-08 Lapua. Got plenty of brass now

 

[bbassi]

Shortly after starting this thread, I bought some Lapua .308 and sized them, then found some 7mm-08 Lapua. Got plenty of brass now

I'm interested if you have shot both and if you noticed any difference in the resized 308 vs the factory 708?

 

[Dark timber]

I'm interested if you have shot both and if you noticed any difference in the resized 308 vs the factory 708?

I have shot both and there is no difference besides the .308 brass being .015 shorter.