Make your Tikka awesome for $85 - Full Frame Outdoors Tikka Stock Kit

[WhoGarrDen]

Curious as well…

One screw right down the middle into the stock. They provide the screw but tell you what size drill bit to pre-drill with.

You can also just use some good double-sided tape and get it on there pretty solidly for range work. Give it a wrap of tape around the stock with whatever texture you want and it'll be on there for a long time. The higher one I got doesn't contact the stock with 100% interface - it is skeletonized inside and has risers based on height, limiting the grip on the double sided tape method.

 

[HairyScandinavian]

Trying not to spend money on a new stock. Worked well today. I can live with it.

View attachment 1057059

Mind if I ask what pic rail and rings those are? Rings got to be the lowest I've ever seen if I'm seeing it correctly.

 

[WhoGarrDen]

Mind if I ask what pic rail and rings those are? Rings got to be the lowest I've ever seen if I'm seeing it correctly.

Also (from the angle) looks like that scope is as far back as it can go without contacting the pic rail, like you want it further back but can't quite get there? My sons rifle had the same problem so I just took an angle grinder to the pic rail and cut a 45* into it and gained the extra half inch to make eye relief perfect.

 

[Rockpicker]

Mind if I ask what pic rail and rings those are? Rings got to be the lowest I've ever seen if I'm seeing it correctly.

Area 419 rail and Vortex Pro rings. Medium I believe.

 

[Rockpicker]

Also (from the angle) looks like that scope is as far back as it can go without contacting the pic rail, like you want it further back but can't quite get there? My sons rifle had the same problem so I just took an angle grinder to the pic rail and cut a 45* into it and gained the extra half inch to make eye relief perfect.

If Tikka didn’t use a one size fits all action I could get it back a little farther without taking a file to the rail. I did that to a Savage and Athlon Helos 2-12 combo. Short tube from turrets to objective.

I tend to like a more heads up cheekweld than mounting the scope as low as possible. My chassis rifles I have 1.25” rings or higher on and one I even have a 1/2” riser. Very comfortable. The Savage and Tikka will eventually get taller rings.