LS Wild Suppressor Covers

[Amos Moses]

Perfect snug fit on a Harvester Evo. Thanks!

 

[hereinaz]

I prefer the way it is. On all the covers I’ve had if they didn’t go past the rear of the suppressor they don’t mitigate mirage nearly as well as covers that go past the back.

This is the principal reason I chose to extend past the rear. Mirage. It can be dialed in.

It also has the corner sewn so it doesn’t slip forward and will extend back for that reason.

If it is longer than desired, the rear can sometimes be folded/rolled back under itself to remove the slack and close the hole.

 

[TNHighlands]

Are all pre-orders still shipping this week?
Received the review link but no shipping yet.

No rush, just curious.

 

[hereinaz]

Are all pre-orders still shipping this week?
Received the review link but no shipping yet.

No rush, just curious.

They will all ship this week.

 

[hereinaz]

Please post issues with the covers, and the suppressor with your suppressor length. Pics help too.

I have tried hard to make sure it is sized to fit. I tested on a bunch and most are working. But, I don’t have access to them all.

Thanks for patience.

 

[deerhunter628]

Please post issues with the covers, and the suppressor with your suppressor length. Pics help too.

I have tried hard to make sure it is sized to fit. I tested on a bunch and most are working. But, I don’t have access to them all.

Thanks for patience.

Can you post a couple close up pics of examples of how they are supposed to fit?

 

[hereinaz]

It is acceptable and within tolerance to be flush or hang over the front a tad.

For the rear, it will hang over because of the constriction sewn into it.

It can be stretched to hang over more or left relaxed. If you push it to the point of almost bunching you can take out slack.

 

[atmat]

View attachment 864720

Lol, could you not grip it and pose like this going forward?

 

[hereinaz]

Do I need to hire a hand model? Hahahaha

 

[WeiserBucks]

Do I need to hire a hand model? Hahahaha

You need a 338 Ultra muffler for a two hand grip

 

[Pickettpuncher]

I got tracking on mine the other day. Any way you can speed up the atf so they’ll approve my can

 

[Tanner]

I prefer to show pics of my suppressors like this so you can get an idea of length and girth. For science..

 

[atmat]

I’m afraid we’ve started a trend the mods will shut down quickly haha.

 

[Duh]

@hereinaz I think I got the wrong size sent to me? I see some handwriting on my order form but I ordered the 9 inch length for the U9. Fits snug on the circumference though.

 

[hereinaz]

@hereinaz I think I got the wrong size sent to me? I see some handwriting on my order form but I ordered the 9 inch length for the U9. Fits snug on the circumference though. View attachment 864843

I am an idiot… new one incoming. Find a friend with an Ultra 7.

There are over 20 different sizes that were ordered. I had dozens of suppressors to convert and saw Ultra, and I guess I had 7 on the brain. That’s my handwriting.

When the covers relaunch in the store it will be carefully designed for you to select the suppressor and confirm the length.

The order sheet will tell production which one to ship. This error won’t happen again.

 

[atmat]

I am an idiot… new one incoming. Find a friend with an Ultra 7.

There are over 20 different sizes that were ordered. I had dozens of suppressors to convert and saw Ultra, and I guess I had 7 on the brain. That’s my handwriting.

When the covers relaunch in the store it will be carefully designed for you to select the suppressor and confirm the length.

The order sheet will tell production which one to ship. This error won’t happen again.

I have a U7…

 

[pattimusprime22]

Received mine for my AB raptor 10 with 5" reflex. Getting the cover pulled up over the ribbed section was a little tedious, but now it's not going anywhere. I'd say fit was perfect. With how much material there is on this one, I could pull it tighter to get it to extend slightly over the end of the can as shown or have it drawn back flush within the end. Thanks @hereinaz for providing me some mirage help with this long, girthy thing at a great price!

And no, I'm not trying to compensate for anything...

 

[waspocrew]

Received mine for my AB raptor 10 with 5" reflex. Getting the cover pulled up over the ribbed section was a little tedious, but now it's not going anywhere. I'd say fit was perfect. With how much material there is on this one, I could pull it tighter to get it to extend slightly over the end of the can as shown or have it drawn back flush within the end. Thanks @hereinaz for providing me some mirage help with this long, girthy thing at a great price!

And no, I'm not trying to compensate for anything...

View attachment 864845
View attachment 864847

Damn… and here I thought my TBAC 338 Ultra was big!

 

[Duh]

I am an idiot… new one incoming. Find a friend with an Ultra 7.

There are over 20 different sizes that were ordered. I had dozens of suppressors to convert and saw Ultra, and I guess I had 7 on the brain. That’s my handwriting.

When the covers relaunch in the store it will be carefully designed for you to select the suppressor and confirm the length.

The order sheet will tell production which one to ship. This error won’t happen again.

Thanks sir!

 

[hereinaz]

Damn… and here I thought my TBAC 338 Ultra was big!

I know, right! Got that math right.