Lightweight 6mm Silencer

[Papabear2547]

I have a threaded 16” .243 I’d like to put a silencer on.
I have an Energetic Armament Vox S and I think it’s a great can. They also make the titanium Lux 6.5mm at 7.9” and 8.99oz. Diligent defense also makes the 6.75” 9.1oz Wolf Hunter in 6mm.

Which can would you choose for a dedicated 16” .243? My primary priority for this can is as much sound suppression as possible. Second priority is weight, followed by length, and these cans are pretty close so I find the differences in length and weight to be negligible between them.

 

[Lawnboi]

If sound suppression is a priority and your rifle is a 16” barrel I would be looking at the ~9” cans.

Significantly more comfortable on a short barrel.

 

[Papabear2547]

If sound suppression is a priority and your rifle is a 16” barrel I would be looking at the ~9” cans.

Significantly more comfortable on a short barrel.

Do you have any recommendations on ~9” cans I should be looking at?

 

[HarvDog]

I’m in the same boat.
My can will ride on a 16” 6creed

Was going to get the Wolf hunter but the Enticer STI with a 6.5mm end cap may make more sense.
But I already own a Scythe so no real need for the 30cal option at the moment

 

[wesfromky]

Do you have any recommendations on ~9” cans I should be looking at?

OCL Hydrogen L 6.5, but they don't make many of them, so hard to find.

 

[Lawnboi]

Do you have any recommendations on ~9” cans I should be looking at?

I have a Tbac Magnus, I know they are hard to find now and pricey. But it’s a lot nicer with the larger can on a 16” non 223 than my other suppressors.

 

[khuber84]

OCL Hydrogen L 6.5, but they don't make many of them, so hard to find.

This is a fantastic can. The next best bet for metering DBA at shooters ear thats relatively light weight, and very available, is the Deadair nomad LTI XC. I have one, it's a very quiet can. I also have the DD LTI, they're similar lengths, and the Deadair has a notably less poppy tone. Their all good cans. I'm just finding that the 3d printed cans in general seem to have a more muted tone, less pingy or poppy. I don't know if it's the 3d printed texturing of the baffles and interior of the can or what.

 

[justin davis]

Thunderbeast Magnus