Let's See Your Semi-Custom Tikka Builds

Rob5589

WKR
Joined
Sep 6, 2014
Messages
6,299
Location
N CA
With all these prefits hitting the market for Tikka, and with gunsmiths still hell bent on charging high dollar to thread on a barrel... its getting to be an easier decision to purchase the following:

1) Barrel Vise
2) Outside Action Wrench
3) Inside Action Wrench
4) Torque Wrench
5) Go/NoGo Gauges

With the above tools, you can thread on your own Tikka prefit without paying anyone else to do it.

The ideal scenario would be to find a group of Tikka shooters (like those on this thread) and share some of the above tools, as I dont imagine the average shooter is going to get much use out of go gauges, etc.

For a standard chamber, sure. Want something specific, a smith will still be necessary.
 

Forest

WKR
Joined
Sep 23, 2016
Messages
533
Location
Richland MT
Interesting thread and some awesome builds. Makes me seriously consider going down this route on the next rifle. What are the issues/things you guys are trying to "fix" over the factory t3x??
Flimsy factory stock??
Factory barrel that is too light and poor twist rates??

What else? What are your main objectives in a tikka build??

Sent from my SM-G973U1 using Tapatalk
 

Lawnboi

WKR
Joined
Mar 2, 2012
Messages
8,391
Location
North Central Wi
Interesting thread and some awesome builds. Makes me seriously consider going down this route on the next rifle. What are the issues/things you guys are trying to "fix" over the factory t3x??
Flimsy factory stock??
Factory barrel that is too light and poor twist rates??

What else? What are your main objectives in a tikka build??

Sent from my SM-G973U1 using Tapatalk

I think the stock is serviceable, I do appreciate the stiffer mcmillan I moved into add into that it’s pillar bedded, free floated and more ergonomic, it’s a win, and shrunk my groups quite a bit, especially shooting different positions.

Some of the stock barrel twists are fine, but is a consideration. The 10 twist 243 I have is being rebarreled due to twist, had it been faster I would have experimented with heavier bullets. The barrel contour is fine for me, for a hunting rifle I’m carrying around.

I replaced the plastic bits on all mine. Bottom metal and magazine. Couldn’t be happier with that decision but probably wasn’t completely necessary.

I’d be completely happy with a t3 lite in a caliber I want, with a new stock, cerakote and replaced plastic bits with metal for a long, long time.
 
Joined
Sep 23, 2018
Messages
1,941
Location
Santa Rosa, CA
You guys going the Tikka prefit route - how are you removing the factory barrels? What tools? DIY? I only ask because I have heard that they can be a real bear to pull - specifically the Tikkas.

Mine came off easy, I used a Davidson vice on a truck hitch mount I built and a wheeler action wrench. One good tug and it spun right off.
 

Attachments

  • DC066897-0728-4478-948D-B67B85A57604.jpeg
    DC066897-0728-4478-948D-B67B85A57604.jpeg
    404.2 KB · Views: 322
  • 1E64F8D1-3FCC-458E-B1C3-DC0515A3E30A.jpeg
    1E64F8D1-3FCC-458E-B1C3-DC0515A3E30A.jpeg
    220.6 KB · Views: 331

Dhbwa

WKR
Joined
Sep 10, 2018
Messages
837
Location
Richland WA, SE WA
One of two I just got back from Shaen Rifles.
Totally good guy!!
This is a 7-08 Ackley in CTR stock /bottom
Metal. Proof Sendero Lite contour at 24”.
The other is a 22” Proof Sendero Lite 6.5 CM. Same stock except painted so I can tell them apart..

2DB30933-9A2A-4080-AC22-2BD94E3ACC33.jpeg043BE887-8C17-4C6E-8A4C-1FD8EE55F08C.jpeg
 
Last edited:
Joined
Aug 1, 2018
Messages
25
Location
NC
Some really nice rifles here. Looking at doing a semi custom build for a long time. I have decided now is the time. Looking at donor rifles it seems hard to beat the T3x's locked and loaded has right now for cheap (in my opinion).

Again some great rifles here
 
Joined
Aug 1, 2018
Messages
25
Location
NC
Im picking one up tomorrow. I've been searching rokslide for the best mods to do to them. Looking to build a light hunting rifle. Don't have to be ultra super light but nice light set up. Not 100% sold on the carbon barrels but they do look nice. I'm guessing they shoot better than the stock barrel (which I here do really good)
 
Joined
Sep 5, 2014
Messages
601
Location
Palmer, AK
300 WSM
Cerakote and brake done by former owner.

Long action bolt stop done by me.

RedSnake Tactical long action bottom metal installed by me.

Accuracy International 338 LM magazine.

Trigger spring mod done by me.

All my Tikka’s have the cheek risers.
982da4b77cc0c0732c3559bdd4822358.jpg
44c51c286c1a1ad61208afe79276fc6a.jpg



Target is three shots fired at a 100 yds this last Monday.
Berger 215. Reloader 26.
Going to play with that combo some more.

Did you get that from a guy in Arkansas? Looks like previous gun...
 
Joined
Feb 19, 2016
Messages
409
Finally assembled.

Tikka T3 Action - donor action came cerekoted in gunmetal.
Proof Sendero Prefit. 6.5 PRC @ 24"
Yo Dave Trigger Spring - Trigger at ~1.9 lbs
Hells Canyon Magazine
Mountain Tactical Long Action Bolt Stop
Bolt fluted by LRI
Mesa Precision Stock
Griffin Armament Taper Mount Paladin 2Muzzle Brake
Zeiss V4 4-16 on Tally Mediums (will probably switch to low)

Caught a weather window to go put some factory ammo down the tube. Both the 147 gr and 143 gr Hornady ammo shoot under .5 moa. Can't wait for some warmer weather to see what this rifle can do. I am really surprised how easy it is to put a rifle like this together. I am not a gunsmith by any means, but the only help I had was removing the barrel and screwing on a new one and they checked headspace.

View attachment 141718

View attachment 141720

View attachment 141719

Great set up. Looking at very similar. Do you have a weight on that?
 
Top