Lapua 7 PRC Brass

TxLite

WKR
Joined
Sep 6, 2018
Messages
2,277
Location
Texas
Lapua is going to start making 7 PRC apparently. Does this mean they will start supplying consumers again with brass? Its been pretty hard to find Lapua lately.

 
Dang, fall of 25. I'm surprised it's taken this long, seems the 300 and 6.5 was much faster.

Looks like Peterson and ADG for now.
 
Dang, fall of 25. I'm surprised it's taken this long, seems the 300 and 6.5 was much faster.

Looks like Peterson and ADG for now.

They always take a while to bring it to market after introducing it. Was that way with 300 PRC, 300 WM, 300 WSM, 6 GT (not sure if this is even out there yet?), and now the wait for Dasher and 7 PRC.

I remember for a fair bit of time when the topic of comparison between 6.5 creed and 6.5x47 was the fact lapua brass was available for the x47 and creed was primarily serviced by hornady and norma. Before alpha/peterson/adg were a thing. I recall people forming creedmoor brass out of lapua 308 palma brass to fill the void!
 
Back
Top