Kifaru E&E center buckle conversion

Joined
Dec 29, 2012
Messages
857
I have always wanted an E&E with the center buckles (like the urban zippy, xing, xray, etc). But I still like having the ability to D&L it.

So I came up with this. Materials needed:

1- Two sets of non slotted buckles
2a- 4 pieces of webbing with tri-glides on the ends (I used 4 straps from the Kifaru cargo panel kit)
2a- 4 slotted duraflex loop locs
OR
2b- 4 Kifaru k-clips

First, cut off the existing compression straps on the E&E:
IMG_1159.JPG


Then add your slotted loop locs to where the compression straps used to attach to and put the tri-glide through it. If you have k-clips you can just attach the k-clips to the same place.
IMG_1160.JPG

IMG_0816.JPG


Then add your buckles and you're done
IMG_0817.JPG


If you want to D&L the E&E again, you simply remove the loop locs or k-clips from the sides to the center webbing where you cut. Slide the slot on the two PALS columns left and you're good to go again.

Easy access to the E&E insides is now at your fingertips.
 
Back
Top