Iron will sharpening

[Brucebarker024]

How does everyone on here sharpen their Iron wills?


Sent from my iPhone using Tapatalk

 

[Billy Goat]

"Grey" Guide for Grim Reaper, Hades, Iron Will DOUBLE BEVEL, Magnus stinger and buzz cut, Alien Double bevel, Zeus double bevel,

staysharpguide.com

This is what I use. Few fine pieces of sand paper and cardboard with buffing compound.

You can use other things to touch them up. This takes a little bit of time but puts a really good even edge on the blades.

 

[positivepete!]

Following.

 

[gleitzj]

I bought the kit he suggests and I still think it's a major pain and the bleeder blades are almost impossible, especially if there's any divets or flaws from hitting rock, bone, etc.

I just dedicate new ones for animals and a few for practice.

 

[Trial153]

I have great luck resharpening them, 20 degree guide and flat stone or sand paper..both main blades and bleeders. I can’t kill these things.makes me wonder why I own so many

 

[Brucebarker024]

I just got a bunch in a trade and 3 have been shot into foam and are a little dull. Still sharper than most other broadheads but I’ve heard they get insanely sharp. I’ll try out that stay sharp system.


Sent from my iPhone using Tapatalk

 

[mavinwa2]

Use my Worksharp belt-drive sharpener
Razor edges!!
My hunt knives too

But...do not use with blade on carbon arrow shaft as it can flex. I put an insert into round steel tube, screw in blade and then use belt WorkSharp

 

[justin84]

I have great luck resharpening them, 20 degree guide and flat stone or sand paper..both main blades and bleeders. I can’t kill these things.makes me wonder why I own so many

Want to sell a few?

 

[Trial153]

Want to sell a few?

I really should, but then i would would just buy more ...i have issues

 

[TheViking]

"Grey" Guide for Grim Reaper, Hades, Iron Will DOUBLE BEVEL, Magnus stinger and buzz cut, Alien Double bevel, Zeus double bevel,

staysharpguide.com

This is what I use. Few fine pieces of sand paper and cardboard with buffing compound.

You can use other things to touch them up. This takes a little bit of time but puts a really good even edge on the blades.

This is a pain in the @ss

 

[Brucebarker024]

Use my Worksharp belt-drive sharpener
Razor edges!!
My hunt knives too

But...do not use with blade on carbon arrow shaft as it can flex. I put an insert into round steel tube, screw in blade and then use belt WorkSharp

Is this the one? I have one of these but didn’t know if it was appropriate for this application.



Sent from my iPhone using Tapatalk

 

[Trial153]

if you use any belt.....make SURE you do not pull the blade past the point or you will round all the tips off. Don't ask how I know that

 

[Billy Goat]

This is a pain in the @ss

Really? Seems pretty simple to me. Keeps your edges on exactly the same plane. Just do even strokes per side. Makes it idiot proof. Not something I would do in the field.

What do you suggest?

 

[TheViking]

Really? Seems pretty simple to me. Keeps your edges on exactly the same plane. Just do even strokes per side. Makes it idiot proof. Not something I would do in the field.

What do you suggest?

It’s just very tedious.

I use a flat stone. A few swipes each way and you’re good.

 

[paxamus]

Y’all got me wanting to get a Worksharp now, is the Ken Onion version worth the extra money? And how do you sharpen the bleeders with it?


Sent from my iPhone using Tapatalk

 

[jakelogsdon]

The worksharp is tough to beat for sharpening a bunch of blades or knives or tools really fast. Just use the purple belt only on broadhead blades. You can shave with them when you're done.

 

[Colobwhntr]

I've just used a flat stone and have had good results takes no time at all

 

[Krieg Hetzen]

I use the same field sharpener from work sharp that I use on my knives and axe. I get it shaving sharp (like my knives) on the worksharp and then transition to a 2000/5000 grit water stone. Run the 2k grit till its scary sharp and mirror bright then finish with the 5k grit. I test them on rubber bands held with hardly any tension. Once it cuts with causing deflection then I am done. The A2 steel makes it take longer but its worth it.

 

[Huntforever]

I just bought a new KME broadhead sharpener along with 400, 600, 1000, 1500 and 2000 grit sand paper. Also used cardboard and white buffing compound.

I must be doing something wrong because its nice and shiny but dull as a butter knife. I spent 3 hours working on one blade edge. It took forever to even get a burr and still wasnt a great burr. I'm at a lost and ready to throw in the towel. 3 hours and nothing. Lol

Maybe I'm setting the blade incorrectly into the kme? I even bought the new head piece for small blades like the iron will.

Maybe the sand paper? Maybe just me.

 

[JoeDirt]

Work sharp elite works on both Iron Will double and single bevel.