Coming into this research I knew absolutely nothing about rifle scopes and what they are capable of. I still don't know nearly as much as I probably should to be spending as much as I am, but thats why I'm here. I don't know a single person that knows scopes let alone dials so all info has come from the not always so trustworthy internet. The first and only scope I've ever used was a super cheap vortex that I learned to dislike very quickly. It came on a cheap rifle combo that I'm ready to scrap and make a full upgrade on. In the end, the scope I purchase will be mounted on a 300 win mag. For the most part my western hunting is done in fairly open areas. I could take a shot in dark timber but I would presume it would come from a distance. I can confidently say I don't think I'll ever be comfortable at taking shots >600-700 yards. That said, dialing for elevation is something I'm certainly interested in.
With the research I've done I'm pretty dead set on the Nightforce SHV 4-14x50.
I've got a few questions and some that I THINK I already understand, just would like a little bit of confirmation on.
For those that do dial, at what distance do you decide to dial vs the traditional holdover? About anything past your zero?
When comparing FFP and SFP, the internet seems to like to tell me that the biggest advantage to FFP is accurately ranging your target using the scope, but that isnt something I think I'll ever do. My main question, is if I'm using the traditional holdover method using the dashes on the reticle for any shot past my zero, a FFP scope is required, correct? I think ranges change as you adjust magnification on an SFP? I believe that mistake cost me a nice MN whitetail last November lol
There are no actual advantages of using a mil reticle over moa with a FFP scope, right? For whatever reason, it seems like MOA just makes more sense to me. Want to make sure I'm not missing on something though.
I had considered the Leupold CDS system for a bit, but due to some poor reviews on this site I've decided against it. There, you would submit all your ballistic and load info and they created a dial for elevation for you. With other brands of dialing capable scopes, you'd pull up a ballistic trajectory calculator on the internet, make a DOPE sheet, and adjust your elevation dial for the corresponding MOA or MIL measurement, right?
Anyone have the SHV that might have a recommendation one way or the other? FFP vs SFP? MOA vs MIL?
With the research I've done I'm pretty dead set on the Nightforce SHV 4-14x50.
I've got a few questions and some that I THINK I already understand, just would like a little bit of confirmation on.
For those that do dial, at what distance do you decide to dial vs the traditional holdover? About anything past your zero?
When comparing FFP and SFP, the internet seems to like to tell me that the biggest advantage to FFP is accurately ranging your target using the scope, but that isnt something I think I'll ever do. My main question, is if I'm using the traditional holdover method using the dashes on the reticle for any shot past my zero, a FFP scope is required, correct? I think ranges change as you adjust magnification on an SFP? I believe that mistake cost me a nice MN whitetail last November lol
There are no actual advantages of using a mil reticle over moa with a FFP scope, right? For whatever reason, it seems like MOA just makes more sense to me. Want to make sure I'm not missing on something though.
I had considered the Leupold CDS system for a bit, but due to some poor reviews on this site I've decided against it. There, you would submit all your ballistic and load info and they created a dial for elevation for you. With other brands of dialing capable scopes, you'd pull up a ballistic trajectory calculator on the internet, make a DOPE sheet, and adjust your elevation dial for the corresponding MOA or MIL measurement, right?
Anyone have the SHV that might have a recommendation one way or the other? FFP vs SFP? MOA vs MIL?