WTS hunting and target arrow clean out

[doncarpenter]

I am trying to clear out some hunting and target arrows. Most of these arrows are either brand new or barely shot into a foam target.

20 - Gold Tip Huner XT 300 spine Sold pending funds

• 315 grains total arrow weight w/o field tips. I started with two dozen and culled 4 during the build process for various reasons. Most of these have been shot sparingly and some not at all.
• Aluminum insert with 20 grains fact weights screwed in the back with blue Loctite
• Matte white One-Stringer wraps
• 3 fletch with Q2i Rapt-X vanes roughly 2 degree right offset
• Pin nock bushings with white Bohning pin nocks
• 27.75” ctc 28.5” insert to the throat of the nock

24 – Black Eagle Carnivore 300 spine .003 straightness $OLD

• 284 grains total arrow weight w/o field tips. These are new. I built them to be a 3D arrow but I ended up just shooting my hunting arrows.
• Aluminum insert
• 28” ctc 28.5” insert to throat of the nock
• Aluminum MGF nock bushing
• M-nocks
• 3 fletch with Q2i Griff-X 2.3”
• Spine marked on the shaft silver sharpie

12 – Victory V-TAC 23 Elite V1 380 spine brand new never shot $165 TYD

• 356 grains total arrow weight
• 100 grain SS points
• 28” ctc
• V-TAC 23 nock bushings with AAE IP nocks
• 3 fletch with Q2i Fusion X-II 3” vanes over a matte white One-Stringer wrap

12 – Black Eagle PS 23 400 spine/.001 Uncut shafts brand new $150 TYD

12 – No Limit Archery Liberty Shafts 500 spine .001 straightness $50 TYD

• These are 23 series target arrows 7.8 gpi
• 12 aluminum nock bushings are included

12 – Arachnid Archery (No longer in business) Widowmaker 250 spine .003 straightness uncut 32” shafts brand new $90 TYD

• 5mm arrow shafts 11.25 gpi heavy hitters
• Will come with:
  • Easton 75 grain brass HIT insert
  • Ethics archery 40 grain SS impact collar
  • Original aluminum threaded outsert (junk)
  • Easton HIT epoxy and chamfer stone

I can cut any of the arrow shafts to size for no charge prior to shipping.

Paypal goods and services only and I will cover any of the fees.

 

[doncarpenter]

Carnivores are sold.

I found two dozen 20 grain screw in weights and the installation tool that I will include with the Gold Tip Hunter XT's.

Also, adding some pics of the Liberty nock bushings and widowmaker parts.

Sent from my SM-S911U using Tapatalk