Howard's Total Vise Legacy Press

[ResearchinStuff]

My bow is the PSE mach 34

The pic you posted in #17 of the fingers looks to be a matthews. Surely that arrangement would just slide off on a limb without those little knobby pieces

 

[sndmn11]

The pic you posted in #17 of the fingers looks to be a matthews. Surely that arrangement would just slide off on a limb without those little knobby pieces

Correct, Mathews require the pressure to be at that specific spot, so Howard designed the finger tips to fit the Mathews bracket thing.

Any other manufacturer would get pressed normally.

 

[ResearchinStuff]

Thanks for the pics

 

[success]

I'd have to see a mach 30 in his press. The limbs are beyond, beyond parrallel. Super sketchy to press with an easy green.

 

[ResearchinStuff]

Yeah I have a mach 1 plus an ez green, and the limb angle is why I'm thinking about this one. Well, that and the discount coupon i won in the cold bow challenge

 

[ResearchinStuff]

I'm gonna make the plunge, excited to have my hands on this press here in a few weeks

 

[sndmn11]

I'm gonna make the plunge, excited to have my hands on this press here in a few weeks

The draw board is the peach of the system.

 

[dtrkyman]

Pic of the non Mathews bow looks to be pressing the limb below the optimal spot, should be right at the axle.

 

[Justin Crossley]

Sam's review is live on the homepage.

Howard's Total Vise Legacy Press Review

 

[sndmn11]

@KickinNDishin did a booboo last week broadhead tuning. A rush order on a new string and the convenience of the total press had her back in business exactly one week later. We use the vise and press 1000X more than I anticipated.

 

[realunlucky]

With all the bow drama I've had this season, the ability to make not only those huge changes but more importantly those slight tweaks has this bow shooting the best it ever has for me.

Sent from my SM-S926U using Tapatalk

 

[realunlucky]

There was a question about how short the press could go with crossbow post installed- under 7 inches on the first hole

Just under 16 on the fourth hole-

 

[ResearchinStuff]

My harolds press showed up while I was on my elk hunt, now i need life to slow down a bit so I can get it set up and test it out. Planning to do a head to head comparison against my ez green with the archery designs draw board.

 

[the_young_gun]

Has anyone tried out the arrow spine press attachment by chance?

I saw Elkshape’s video with the guys selling a device that just linearly compress the arrow for like $550!!! And it made me think about the <$50 attachment for the Total press that does the same thing, and wondered if anyone had tried it out yet.

 

[sndmn11]

Has anyone tried out the arrow spine press attachment by chance?

I saw Elkshape’s video with the guys selling a device that just linearly compress the arrow for like $550!!! And it made me think about the <$50 attachment for the Total press that does the same thing, and wondered if anyone had tried it out yet.

I have not