Hawkins Hunter 223 mag / HNT 26 Tikka

[B_Reynolds_AK]

Just a couple notes if anyone is wanting to run a Hawkins Hunter 223 Flush Magazine
with a HNT 26 Tikka build.

1- The bump out on the back of the mag is about 1/16 too far down. A flat file to heighten the bottom of the bump out is necessary.



2- The feed lips on the mag are too thick. They will hit on the bottom of the action before the mag can latch in place. I took a grinding wheel and the file to narrow the outside of the lips so that it can fully seat.





3- This mag holds 5 rds, however it does so just barely with no movement downwards. When you try to install the mag with all 5 rounds and the bolt forward on the gun, it will not fit. The magazine will only seat in place with 4 rounds in it.

 

[skipper907]

the mag was probably designed for a remington type action. tikkas generally only work well without modification with AICS metal feed lip mags or the factory mag. Plastic AICS mags wont fit unless grinded the feed lips way dont and it kind of becomes pointless

 

[HawkinsPrecision]

Hi guys, our magazines are designed to be compatible with Remington 700 style actions and their clones ONLY. Any other action type is going to give you issues.

 

[Tahoe1305]

Hi guys, our magazines are designed to be compatible with Remington 700 style actions and their clones ONLY. Any other action type is going to give you issues.

But with some minor mods sounds like he got it to work! Which I think is what he was getting at.

Acknowledge that has to be Hawkins stance but sure is sweet if users can do some minor mods and avoid heavy AICS options.

Keep making em!!!!

I have one in a savage element chassis. May try to work it to fit my tikka as well. Worse case I give Hawkins some more money.

 

[st1650]

Just got a new Hawkins 223 hunter mag and it doesn’t work in a defiance anti 204R on a HNT26. Too bad cause the 308 works fine in the same stock with the 22 creedmoor barrel but seems like the external dimensions are different. I’m waiting to get a MDT Gen3 lss with a carbon fiber handguard and these come with an adjustable latch height so that might work

 

[Justin Crossley]

Hi guys, our magazines are designed to be compatible with Remington 700 style actions and their clones ONLY. Any other action type is going to give you issues.

So when is the Tikka version coming out?? I'll buy a couple if you make them. If not, I'll probably modify a couple.

 

[Lawnboi]

So when is the Tikka version coming out?? I'll buy a couple if you make them. If not, I'll probably modify a couple.

WR 6 round is probably right there for not sticking out of a chassis. Below is the 10 round, barely sticks out of my ACC and is the lightest aics mag I have felt.

But they are $$