Sold Hankins Custom Smokeless ML .45

Status
Not open for further replies.

Carolina91

Lil-Rokslider
Rating - 100%
14   0   0
Joined
May 5, 2021
Messages
201
I really hate to do this but i am listing my smokeless muzzleloader for sale. It is a hankins custom smokeless 45 cal. Mesa precision muzzleloader action with the bolt face designed for hankins ignition system. Brux 1:20 barrel 26" with hankins brake. Cerakote elite black paint job. Trigger tech trigger and AG composite bdl visigoth stock in coyote brown. This is the most accurate gun ive ever owned and the group below shows why. That group is an 8 shot group at 100 yards.20220819_154419.jpg I shoot imr 4198 71grains with a 303 grain pittman hardcore aeromax its right at 2800 fps. Will also include the modules with it. This muzzleloader is also capable of shooting blackhorn but i have never shot anything other than smokeless. Scope not included $3500 shipped.20220710_160817.jpg20220710_160832.jpg20220819_154412.jpg
 

Scoutfarm

FNG
Classified Approved
Rating - 100%
5   0   0
Joined
May 28, 2019
Messages
57
Gawd!!! That’s a great price for this muzzy! If I didn’t already have two I’d buy it.
 
OP
Carolina91

Carolina91

Lil-Rokslider
Rating - 100%
14   0   0
Joined
May 5, 2021
Messages
201
This must be what that ignore button is for.

Awesome rifle. Whats the weight?
Honestly i am not sure i would guess 10 lbs without the scope. Its got a stout barrel. Ive carried it in my gun bearer on my pack and it was comfortable.
 

Donotpet

Lil-Rokslider
Classified Approved
Rating - 100%
4   0   0
Joined
Jul 31, 2019
Messages
196
Location
NC
Somebody needs to snag that! Damn what a hammer!!!!!!!!!!!!!!!
 
Rating - 100%
3   0   0
Joined
Jul 20, 2016
Messages
1,546
😍
Can you take some pictures of the bolt side of the gun? Does it take bare primer? Or they need to go into something like my knight.

Edit: I looked up the action
 
Last edited:
OP
Carolina91

Carolina91

Lil-Rokslider
Rating - 100%
14   0   0
Joined
May 5, 2021
Messages
201
😍
Can you take some pictures of the bolt side of the gun? Does it take bare primer? Or they need to go into something like my knight.

Edit: I looked up the action
The primers are in hankin ignition system primer modules. I use a large rifle magnum primer in the modules.
 

Scoutfarm

FNG
Classified Approved
Rating - 100%
5   0   0
Joined
May 28, 2019
Messages
57
Friendly bump.

This rifle will shoot BH209 powder just as accurately and push those 303 Pittmans somewhere around 2475 fps with a 110 gr. By weight charge.

Are you including the bullet sizing die?
 
OP
Carolina91

Carolina91

Lil-Rokslider
Rating - 100%
14   0   0
Joined
May 5, 2021
Messages
201
Friendly bump.

This rifle will shoot BH209 powder just as accurately and push those 303 Pittmans somewhere around 2475 fps with a 110 gr. By weight charge.

Are you including the bullet sizing die?
I can add it in since it's set. But I'm ordering another one at some point so I planned on keeping it.
 
Rating - 100%
50   0   0
Joined
Dec 27, 2019
Messages
1,058
Anyone who is unfamiliar with or doubts the accuracy of these rifles go to youtube and see them in action.. The builder is just up to road about an hour from me(KY) and builds some of the best custom rifles on the planet (Muzzle loader or otherwise)... He is a stickler for detail and an absolute perfectionist who takes a lot of pride in his work and you can rest assured that a rifle will not leave his shop until it meets his super high expectations.. GLWS..
 

Grumman

WKR
Rating - 100%
12   0   0
Joined
Jan 30, 2016
Messages
1,642
Location
Kentucky
Anyone who is unfamiliar with or doubts the accuracy of these rifles go to youtube and see them in action.. The builder is just up to road about an hour from me(KY) and builds some of the best custom rifles on the planet (Muzzle loader or otherwise)... He is a stickler for detail and an absolute perfectionist who takes a lot of pride in his work and you can rest assured that a rifle will not leave his shop until it meets his super high expectations.. GLWS..

Interesting thanks for that post. I have never heard of him and he’s within an hour of me also. Maybe a good option for gunsmith work without the risk of shipping.


Sent from my iPad using Tapatalk
 
OP
Carolina91

Carolina91

Lil-Rokslider
Rating - 100%
14   0   0
Joined
May 5, 2021
Messages
201
Bump for a muzzleloader that shoots a 300 grain bullet 3000 fps. Capable of shooting out to 1000 yards.
 
Status
Not open for further replies.
Top