Hamskea fit on V3

[devinhal]

If the bow is within spec according to Mathews for the Arrow Rest, then you will have clearance and shouldn't run into any issues.

 

[Kularrow]

If you have your center shot set up correctly it wont be an issue. If you like your arrow high on the berger hole then their may be an issue. I have mine set at 13/16 and running straight through it and have zero issue. Also running 1/16 to 1/8 nock high.

He’s 100% , I have a Hamskea Trinity on a V3 27 with zero issues. I even running a TS quiver that hugs in there and I still have clearance. If you or your tech set it up properly you’ll be fine. There’s plenty of V3 Set ups on YouTube running Hamskea. Outside of the Mathews Integrate im positive it’s the most common rest for it.

 

[Deer777]

Old thread, but anybody running the gen 7x on Mathews with the downward angled roller guard? They made a Mathews bracket for it but I can’t find if they work for the V3 or V3X. Got a hamskea trinity but like the looks of the gen7x. Thanks for any feedback