Gunwerks Elevate 2.0 bipod?

[NSI]

Shot side by side with my CAL and honestly could not tell a difference in stability/wobble zone between the two.

Same.

-J

 

[highside74]

I bought the v2 for this last rifle season. The spring legs stopped working after hardly any use, if any at all. Maybe 70 rounds completely collapsed and a couple deployments dinking around. Has anyone had issues with the legs? I can push the button on 1 and it will deploy about 2 inches. The other won't deploy at all. I have to push the button and pull it out.

 

[Samson7x]

I bought the v2 for this last rifle season. The spring legs stopped working after hardly any use, if any at all. Maybe 70 rounds completely collapsed and a couple deployments dinking around. Has anyone had issues with the legs? I can push the button on 1 and it will deploy about 2 inches. The other won't deploy at all. I have to push the button and pull it out.

Have not had that issue. I'm sure gunwerks will take care of it for you.

 

[Marshfly]

I always think there is room for improvement. I'm a few inches off from being able to sit behind it without slouching a little. The other thing is a small amount of play in the spreading of the legs.

This right here is my only gripe. Another maybe 3 inches total would make it 100% usable sitting. Otherwise I love mine. When I took it out to shoot one day my son's eyes popped out at how fast it was to attach/detach and be ready.

 

[swampfoxsc]

S&S Archery is a supporting vendor and has Rokslide discount code. That's where I got that one.

Do you mind DM'ing me this code? Thanks

 

[Samson7x]

Do you mind DM'ing me this code? Thanks

rokslide

 

[swampfoxsc]

Thanks!

 

[Huntinfamily]

What is the best way to mount this on a gun with a swivel stud?


Sent from my iPhone using Tapatalk

 

[NSI]

What is the best way to mount this on a gun with a swivel stud?


Sent from my iPhone using Tapatalk

Install a pic rail.

-J

 

[wind gypsy]

They make little pic rail adapter thingies that fasten to sling studs if a guy doesn't want to go full send mounting one.

 

[HuntHarder]

SLING STUD RAIL ADAPTER

The Accu-Tac Sling Stud Rail Adapter is designed specifically for its bipod line.The adapter allows you to use your sling stud to mount your Accu-Tac bipod.It is CNC machined, and coated with mil-spec hard anodize. Each rail alsoincludes the necessary hardware for installation. For mounting...

accu-tac.com

Or just mount a pic rail on your stock.

 

[wapitibob]

What is the best way to mount this on a gun with a swivel stud?


Sent from my iPhone using Tapatalk

Stock should have 2 holes up front, mount a little rail. Not sure how many rounds I have on my V2 but I like it.

 

[highside74]

The spring problem I posted about is a known issue now and they are working on getting new bushings for current owners and inventory. Buyer beware if you live or hunt in wet country. Water gets inside and swells the bushing in the leg. I'm on waiting list for new bushings. They haven't been delivered to gunwerks yet.

 

[Tmcgarrigle]

The spring problem I posted about is a known issue now and they are working on getting new bushings for current owners and inventory. Buyer beware if you live or hunt in wet country. Water gets inside and swells the bushing in the leg. I'm on waiting list for new bushings. They haven't been delivered to gunwerks yet.

Did you ever get new bushings for this?

 

[highside74]

Did you ever get new bushings for this?

Yes they shipped my bushings and the bipod is working like new. We'll have to wait and see what happens this hunting season.

 

[Tmcgarrigle]

Yes they shipped my bushings and the bipod is working like new. We'll have to wait and see what happens this hunting season.

Nice, I just picked one up and am liking it so far

 

[TomBono]

Just as an FYI more than anything. Went to use my bipod with my 300 BLK. Clamped it on and saw it was sliding on the rail, even though I snugged it down pretty good.

Finally realized the “recoil lug” for the bipod is quite small and was sliding through the space meant for the mounting screw in the rail. I’ll have to toss a different rail on this rifle to use with the elevate.

View attachment 757990
View attachment 757997

Did you ever find a mount that works? I have the SRS Arca-Pic Rail on my rifle and it has the same issue you’ve experienced

 

[NSI]

Did you ever find a mount that works? I have the SRS Arca-Pic Rail on my rifle and it has the same issue you’ve experienced

Yeah we’ve got this sorted out now with an aftermarket fix.

-J

 

[TX_Diver]

How do these compare to the MDT mountain bipods?

 

[jenstapio]

Only thing I would change is the feet would be interchangeable. When I try and load my bipod it will just slide forward. Maybe it’s by design so that you don’t put a ton of force on the carbon legs and risk snapping them.


Sent from my iPhone using Tapatalk

I've been on the fence about buying one of these bipods. I checked one out at scheels and had the same reservation about the feet. Have you seen these? https://www.gunwerks.com/shop/ay-g2025-gunwerks-elevate-bipod-spike-feet-set-24520