Group buy: AGS Annealer

[hereinaz]

Closing the group buy in 1.5 hours from this post.

 

[nighthawkf-117]

I was one for the 4 "gentlemens agreement" votes. I just purchased using the group buy link so you can count me out of the 4. Thank you!

 

[eaglemountainman]

Does anyone have the specs for the power cord/transformer needed to run the unit? Apologies if it was already mentioned and I missed it.

 

[hereinaz]

Does anyone have the specs for the power cord/transformer needed to run the unit? Apologies if it was already mentioned and I missed it.

The V 3.0 includes the wall plug to power it. Prior versions didn’t.

I can still get it if you need me to.

 

[hereinaz]

STATUS UPDATE:

I got shipping notification for the first 3/4 of the units ordered and balance will ship Friday.

I had to stop the sales early or I would have spread out the delivery on them by another couple of weeks. I didn’t want to do that.

IMO, few business decisions are worse than a group buy or preorder that can’t get delivered timely.

For those that missed it, I will either open up a limited run OR I will just wait until I have them in hand. Either way you’ll have to wait for product to get to me. Price on those won’t change.

 

[eaglemountainman]

The V 3.0 includes the wall plug to power it. Prior versions didn’t.

I can still get it if you need me to.

Oh, great!
Nevermind, I thought we had to supply the power cord.
Thank you, for the quick response!

 

[nighthawkf-117]

Is Temiplaq the best way to set up for annealing? Is it recommended to use both temperatures or can you do just one?

 

[hereinaz]

Is Temiplaq the best way to set up for annealing? Is it recommended to use both temperatures or can you do just one?

Absolutely best way. You know exactly when it hits 750 degrees and is annealed.

The alternative is closing the door and turning out heights and stoping when it “glows red”. I don’t know what that means…

You don’t need the 450. It is just nice for those who worry. It will confirm brass has not annealed.

 

[nighthawkf-117]

@hereinaz is it possible to add temiplaq 750 to my order? If it's a hassle I can order it elsewhere

 

[hereinaz]

@hereinaz is it possible to add temiplaq 750 to my order? If it's a hassle I can order it elsewhere

No problem. I can add Tempilaq or anything else to the orders to ship together.

Gimme a few minutes to add it to the store.

I ran out of the first batch I ordered. I have another batch on order, so I can add stock to it.

 

[satchamo]

No problem. I can add Tempilaq or anything else to the orders to ship together.

Gimme a few minutes to add it to the store.

I ran out of the first batch I ordered. I have another batch on order, so I can add stock to it.

I might go ahead and add it to mine as well… did you get it added to the store?

 

[hereinaz]

I might go ahead and add it to mine as well… did you get it added to the store?

It is added

 

[hereinaz]

I got notice from FedEx that the first batch of units has been delivered to them. I will update once I have arrival estimate from tracking.

If you want to order anything else, you can add it to the order for shipping.

We will be running a Presidents’ Day sale for all of our gear, so if you pick something up on the sale, we will ship it all together. I will figure something out so you get the Valentine sale and free shipping on that order.

 

[Ucsdryder]

I got notice from FedEx that the first batch of units has been delivered to them. I will update once I have arrival estimate from tracking.

If you want to order anything else, you can add it to the order for shipping.

We will be running a Presidents’ Day sale for all of our gear, so if you pick something up on the sale, we will ship it all together. I will figure something out so you get the Valentine sale and free shipping on that order.

I got an email saying they’d start going out this week. Have you got to play with any yet? How does the product look?

 

[hereinaz]

edited: I have a video that I'll be releasing soon.

6 units that didn't have any accessories went out last Friday. I received additional shipments with some of the extra torch holders and bushing and got them into inventory. I'll be shipping out additional units Friday, I am doing my civic duty at the court for jury duty tomorrow.

The Tempilaq has not arrived, so I am going to reach out tomorrow and see when it will arrive. If you ordered Temilaq, I'll be sending you an email with an update Thursday or Friday.

I screwed up communications with the manufacturer, and the "magnum" dies that ship with the unit do not fit short mags like SAUM and PRC. You'll need the WSM bushing. I'm sending an email out later tonight to all pre-orders with some information to make sure and take care of you. That's a crap sandwich for me to eat, not you all. It's on me to make it right.

 

[Ucsdryder]

edited: I have a video that I'll be releasing soon.

6 units that didn't have any accessories went out last Friday. I received additional shipments with some of the extra torch holders and bushing and got them into inventory. I'll be shipping out additional units Friday, I am doing my civic duty at the court for jury duty tomorrow.

The Tempilaq has not arrived, so I am going to reach out tomorrow and see when it will arrive. If you ordered Temilaq, I'll be sending you an email with an update Thursday or Friday.

I screwed up communications with the manufacturer, and the "magnum" dies that ship with the unit do not fit short mags like SAUM and PRC. You'll need the WSM bushing. I'm sending an email out later tonight to all pre-orders with some information to make sure and take care of you. That's a crap sandwich for me to eat, not you all. It's on me to make it right.

So the standard bushing set won’t fit SAUM/PRC like we thought?

 

[Nine Banger]

I got mine, thanks!

 

[stevie]

Planned on using mine for the PRC. Guess I need additional bushings?

 

[hereinaz]

So the standard bushing set won’t fit SAUM/PRC like we thought?

Correct.

I am going to offer them for $15 bucks if you need the saum bushings— which are the same as the WSM.

If anyone wants to make a stink, I will just give them to you.

Sorry for the inconvenience and confusion. I am preparing an email and special link.

 

[hereinaz]

Planned on using mine for the PRC. Guess I need additional bushings?

Yes, I screwed up. Sending a new culpa and correction email with details later tonight. $15 bucks for the WSM and SAUM bushings.