Enclosed trailer advice

sf jakey

WKR
Joined
Jul 8, 2014
Messages
313
Looking to move to an enclosed trailer from an open landscape trailer for hauling my SXS and other gear. Current trailer is a single axle 7x12. Looking at a tandem 14 or 16 long, v nose. My question is about width. Lots of the narrow 7’ wide models, but not many 8.5 wide. Is the extra interior width really worth it, or is it wasted? I go back and forth, but my gut tells me the narrower model is easier to tow due to better visibility along the sides plus less profile outside the vehicle would make it a little better on fuel economy. 14’ is plenty long, but the extra 2 feet on a 16’ I think may tow better. Any feedback about the trailer is appreciated. I use the SXS on private ground, so save the bashing on those. Thanks
 

Team4LongGun

Super Moderator
Staff member
Joined
Aug 4, 2019
Messages
1,798
Location
NW MT
You’re on the right track-the 7’ is much better to tow and see around, but-it’s a PIA to walk around your machine when it’s loaded. Make sure you have a man door and possibly a V nose drive off ramp which will make getting at stuff much easier.
I have both sizes and prefer the 7’
 

madgrad02

WKR
Joined
Nov 24, 2022
Messages
428
Location
Wisconsin
I would go bigger...pain to get machines as mentioned above... I would suggest one thing as I like mine... I have a 8x14 Aluma trailer (only a single axle), but I have a SnoCaps top on it as opposed to a rigid-sided trailer... way lighter and can maneuver by hand if needed.


(not my actual trailer, but a pic for reference)

1681136553427.png
 

packer58

WKR
Joined
May 28, 2013
Messages
1,002
I built out a 7X14 V nose and was great for a couple quads or my Yamaha Rhino, but ...........now I have a Pioneer 1000-3 and am in the process of building out a 8.5X16x7 foot tall V nose. A few things to consider, machine has to fit in the door opening, if your going to attach folding tables or cots to the walls that take up interior width you'll need a trailer wide enough that allows you to open the door and get out of your machine once in the trailer .....depending on machine width of coarse.

Feel free to PM me, I cane really shorten your learning curve modifying and enclosed trailer for hunting purposes.
 

wyosteve

WKR
Joined
Jul 1, 2014
Messages
2,239
Unless you have a 50 in. wide SxS, I'd strongly recommend going 8.5 wide. Saw and talked to a fellow at the dealership trying to unload his Razr from a 7 wide. He said he regrets not going wider. He really had to squeeze to get in and out of the door on his. You can always get tow mirror extensions on your truck if you think you need more vision capability. Just my .02.
 

cobbc03

Lil-Rokslider
Joined
Aug 12, 2020
Messages
258
For reference I'm 6' nd 185, with some layers on it is tough to get in and out of the trailer with my Polaris Ranger in there. I would go for a custom built one that is 8' if you can find one, if not the 8.5 will do fine. I would also go 16 foot just for the extra space.
 

PineBrook413

WKR
Shoot2HuntU
Joined
Nov 26, 2020
Messages
625
Location
Northeast
I'd go wider for the SXS. I've owned 7x16 and 8.5x20 and the 7x16 is great for ATV's and gear but SXS are wide and you'll be fighting it.
 

BigE

Lil-Rokslider
Joined
Apr 3, 2022
Messages
165
I went with a 16 foot v nose 8.5 ft wide enclosed trailer which mainly carries a four door RZR. With bigger wheels and tires the width is necessary, also getting around the car to get inside to load/unload it from the trailer is needed. Or you can plan to take the door off before you load it. The extra space in the front holds a couple of fuel cans, tools, fire extinguisher and a spare tire each for the utv and the trailer.
When pulling with my f350 no issues with visibility etc. I pull with a Yukon about half the time and the mirrors need an upgrade.
 

Tremain4414

WKR
Classified Approved
Joined
Jan 15, 2021
Messages
487
Location
Oregon
6A902429-EC6F-4AA3-A10E-D25F0414D5CD.png
I’m a bigger guy (6’4 240) but I don’t think I’d go any smaller than my 8.5 foot. Maybe if I was loading and unloading with a winch that might be a little easier but for me being able to just drive it on and hop out is really nice
 

Attachments

  • AADC5391-4FFE-479A-8D6D-B62FDCA7DB86.png
    AADC5391-4FFE-479A-8D6D-B62FDCA7DB86.png
    980.5 KB · Views: 94

Winnie

Lil-Rokslider
Joined
May 13, 2020
Messages
185
I have an 8.5 X 16, very similar to the one pictured above and I agree with Tremain, no way would I go narrower. I put my Polaris Ranger in it and gear for 4+ guys elk hunting and it works great. If you are going to add anything to it (furnace, shelving, cabinets, etc) the added space is huge. One last thing, we commonly use it as sleeping quarters after we get where we are going and then you really appreciate the additional space. I had a 7' wide one prior to this one.
 
Joined
Apr 2, 2018
Messages
394
Location
Dawsonville, GA.
I have a 16 foot v nose. Pretty sure it's 6 foot wide X 6'3" tall. I load a polaris general in it. I have to back it in and then I can barely open SXS door enough to slip out the trailer side door. If I did it again I might go with a wider trailer but it fits. General has oversized tires and roof. And it barely clears door opening to load. Kinda like a tuna in a sardine can...lol
 

Titan

WKR
Joined
Sep 13, 2016
Messages
598
Location
Texas
I would definitely go 16' long. Sometimes you need the extra room to get more weight up front with a SxS.
 

jblam

Lil-Rokslider
Joined
Oct 19, 2020
Messages
129
I will 5th or 6th vote for 8.5 width, it is really nice to be able to have a few different options for sleeping arrangements inside and the extra 18” makes a big difference. Also being able to move stuff around in the trailer after the SxS is loaded is great.
 
Joined
Feb 12, 2022
Messages
2,102
7' will tow easier because of visibility like you said, and slightly because of less wind resistance.

8.5' will be easier/more comfortable to load, and more versatile as far as layout etc if you decide to sleep in it.

My preference would be for wider, unless I was planning on towing it in town a lot. Or a lot of tight mountain roads.
 
Last edited:

Remfire

FNG
Joined
Apr 10, 2023
Messages
11
Location
Morrison, Co
I would go with the 16 ft over the 14 as for width. I use my utv a lot and like the wider trailer just makes all things around the sxs and trailer easier, plus when I use the trailer for other things I don't mind the extra square footage. Little to see towing but I rarely town in town so meh.
 

Tremain4414

WKR
Classified Approved
Joined
Jan 15, 2021
Messages
487
Location
Oregon
Definitely agree with the above posts as far as length. Especially with the V nose, it you plan on filling it in with cabinets or storage the extra sq footage is nice. As it sits, I can load my sxs and have plenty of room in the front and behind/under the sxs for gear and coolers. I tow with an F350 and don’t think Id really notice the length differences between 14 and 16 feet but when loading, the extra square footage is really nice to have.
 
OP
S

sf jakey

WKR
Joined
Jul 8, 2014
Messages
313
Thanks for all the good feedback. Looks like I will go for the 16x8 v nose. Any tips or photos of ways to customize with flip down beds etc are welcome.
 

Tremain4414

WKR
Classified Approved
Joined
Jan 15, 2021
Messages
487
Location
Oregon
Here’s a few pictures of how I customized mine. I just did E track with the U bracket snap in things which hold a 2x4. I put 5 of them together then line the top with plywood to make a bed. Ended up doing a bunk bed setup.

Also found a nice 6’ piece of butcher block table for sale at Home Depot. I attached some fold down brackets which allow it to fold down against the wall. Added another smaller fold down table for eating and bigger U brackets up above to hold the 2x4’s for the bed while I’m storing them. Couple of smaller E track pieces with hooks for hanging stuff and a built in cabinet/storage in the front and that’s about it. Think I’m going to install one of those diesel heaters this year but other than that, it’s a pretty comfy mobile camp which I can setup and tear down in about 20 mins by myself
 

Attachments

  • A9CAE19B-9600-4647-84A9-9A27AB323E7D.png
    A9CAE19B-9600-4647-84A9-9A27AB323E7D.png
    618.8 KB · Views: 145
  • FCF708DD-071C-462A-9B0F-072E13F5E35E.png
    FCF708DD-071C-462A-9B0F-072E13F5E35E.png
    530.7 KB · Views: 141
  • FA233884-6DF2-47DC-9C3D-04B7EB0FA86A.png
    FA233884-6DF2-47DC-9C3D-04B7EB0FA86A.png
    660.2 KB · Views: 143
  • 5A1E69B4-1C6B-4BE0-A8BC-2C2A086B4E67.png
    5A1E69B4-1C6B-4BE0-A8BC-2C2A086B4E67.png
    535.3 KB · Views: 142

Beendare

WKR
Joined
May 6, 2014
Messages
9,081
Location
Corripe cervisiam
I just bought a 14’cargo trailer (effectively its only12’ of space) off of Copart pretty cheap and plan on building it out...bring on the ideas.
I know I want a bed that can be raised up out of the way in the back when hauling my quad.

I would like to get a shower in it...but its probably too small for that.
 
Last edited:

drpnw

FNG
Joined
Nov 30, 2023
Messages
24
Location
WA
@Beendare any updates on the trailer build? i fantasize about this on the regular, im just not sure im ready to make the leap on a cargo trailer
 
Top