- Banned
- #1
Have a few too many arrows laying around that i don't use.
6 easton axis n-fused slim-tech 500 spine. cut 26.5 from nock throat to end of carbon. standard HIT insert. white wraps, white easton x-nocks, 100 gr field points. blazer vanes fletched 3* helical. I removed the factory logo so they are just bare carbon. $35 TYD
5 easton axis n-fused slim-tech 400 spine, mossy oak obsession camo (9.8 gr/in). cut 26.5 from nock throat to end of carbon. standard HIT insert. flo orange wraps, green easton x-nocks, 100 gr field points. blazer vanes fletched 3* helical. One vane has slight tear that I'll happily replace if you want. This set up comes out to approximately 400 grains total weight with 11.3% FOC. $40 TYD
On either set, I'll happily strip them down to bare shafts if desired (i'll knock a few bucks off). I've practiced a bit with these, none have been through any animals or shot into the ground; bag target and some into a rhinehart block.
6 easton axis n-fused slim-tech 500 spine. cut 26.5 from nock throat to end of carbon. standard HIT insert. white wraps, white easton x-nocks, 100 gr field points. blazer vanes fletched 3* helical. I removed the factory logo so they are just bare carbon. $35 TYD
5 easton axis n-fused slim-tech 400 spine, mossy oak obsession camo (9.8 gr/in). cut 26.5 from nock throat to end of carbon. standard HIT insert. flo orange wraps, green easton x-nocks, 100 gr field points. blazer vanes fletched 3* helical. One vane has slight tear that I'll happily replace if you want. This set up comes out to approximately 400 grains total weight with 11.3% FOC. $40 TYD
On either set, I'll happily strip them down to bare shafts if desired (i'll knock a few bucks off). I've practiced a bit with these, none have been through any animals or shot into the ground; bag target and some into a rhinehart block.
