Easton Axis 5mm spine question.

[mrasm282]

My setup: Prime Rize, 29.5" draw @ 66 lbs. 29" arrow.

Looking to use 125 grain Magnus Black Hornet with a 10 grain Iron Will outsert. 300 spine should work based on the chart, but may need 260.

Thoughts?

 

[DB29]

Pinwheel says you are good. I would go with the 300 and if you have spine issues when BH tuning take 1/2 inch or so off your arrow length to stiffen it up a little more.

 

[mrasm282]

Pinwheel says you are good. I would go with the 300 and if you have spine issues when BH tuning take 1/2 inch or so off your arrow length to stiffen it up a little more.

Thanks! Any chance you can run this for me with the same stats, but +50 grains of point weight (brass HIT insert)? Pinwheel doesn't work on my phone.

 

[Florida Bow Hunter]

I have found over the years, for hunting, when I’m on the bubble spine wise, to go up in spine, maybe even add 1/2 inch length to soften it.

You can always cut down, but can’t add on an arrow.

This is when your on the bubble. In your case, you can increase poundage as well as trim length so you have far more versatility.


Sent from my iPhone using Tapatalk

 

[DB29]

Here you go.