Drying brass in an oven

[fisherman983]

How hot is too hot and how long is everyone doing it?



Sent from my SM-G996U using Tapatalk

 

[Pickettpuncher]

Oven won’t get hot enough to damage brass

 

[Quicksilver]

200 degrees for 20 minutes takes care of mine

 

[greyling]

I've done 200 degrees for an hour and then turned the oven off. still had some wetness inside some of the bottleneck cases. But these were just piled in on a sheet pan, not set upright or anything.

 

[Oldffemt]

My wife found a dehydrator at goodwill. I get a little heat and good air flow. Only takes about a half hour.

 

[BryanL]

200-250 degrees for an hour or so. Shake them every 20-30 mins. Primer pockets are the hardest part to get dry.

 

[Tumbleweed]

Towel dry the outside then 30 minutes at 200 deg. Never had any moisture left at 30 minutes.

 

[Zerk]

Never heard of this. Wet from the cleaning process, or from when shot?