Does anyone use TAC in their 6x45?

[83cj-7]

No, for the TAC load I’m using once fired FC nickel cases from my buddy’s SWAT team duty load. For 8208 loads I use R-P.

 

[Megastink]

Fantastic results!!!
Do you know you COAL? I was looking at the data from the “others” that we swiped. “Their” claim is 24.3gr of tac is at pressure for the 87. Clearly, that isn’t the case for your rifle. Just curious if I would have the case capacity to fit 27gr of anything in my case with a coal at/under 2.360. I won two pounds of tac. Just haven’t opened them yet. My goal is to find a powder match for the 95gr tmks.

24.3g of TAC is EXACLY what my rifle likes with the 87gr VMax.

 

[ezwy]

24.3g of TAC is EXACLY what my rifle likes with the 87gr VMax.

My current load is 24.2 at 2640 fps.

 

[Megastink]

My current load is 24.2 at 2640 fps.

I think we’re getting somewhere!

 

[30338]

I tested 25.5 grains of TAC today with a 90 ELDx. Velocity was 2,740 fps from 19" barrel. Accuracy was decent but going to experiment a bit with seating depth.

95 VLD with Varget was doing 2520 fps but very accurate.