Daka Grid Organizers for Rifle Cases

[atmat]

The Daka is great. Try it out.

 

[nm.otter]

You have to use the "turret" platform (big cutout) for a rifle with a turreted scope on it or else the rifle won't sit flush. So, to get two in there I can cut the "turret" platform up to accommodate the second rifle's scope I guess.

Windage, elevation, or both?

I really detest protruding windage turrets.

 

[SteveAndTheCrigBoys]

Windage, elevation, or both?

I really detest protruding windage turrets.

It would either have to accommodate your windage or parallax/illum turret. It's the circled panel here. So to get both of my rifles in I'd have to remove pegs and cut a second opening in that panel to accommodate two turrets.

 

[SteveAndTheCrigBoys]

Before I order one and end up returning it...for the DAKA guys how does it accommodate a scope turret? Looks like I'm going to run into the same issue trying to get two rifles with scopes that have turrets on both sides.

 

[atmat]

Before I order one and end up returning it...for the DAKA guys how does it accommodate a scope turret? Looks like I'm going to run into the same issue trying to get two rifles with scopes that have turrets on both sides.

The bottom cushion for Daka has these cutouts where your

 

[SteveAndTheCrigBoys]

The bottom cushion for Daka has these cutouts where your

Gotcha, couldn't tell if they're large enough for a turret.

 

[atmat]

Gotcha, couldn't tell if they're large enough for a turret.

Want me to grab you a pic of the SWFA turret in it? I can do that later after work!

 

[SteveAndTheCrigBoys]

Want me to grab you a pic of the SWFA turret in it? I can do that later after work!

Sure!

I do wonder if having that necessary alignment point will make it tricky to fit two rokstok'd rifles in the case. It's a pretty tight fit.

 

[atmat]

I lied: I just checked and the SWFA windage turret is SLIGHTLY too large to fit in the holes. Which means you have to put it (and the bolt) facing up into the soft padding on top.

Not a huge issue, but it means that you can’t put two Rokstock in there because they have to orient the same way.

A smaller turret would fit. The SWFA is just a touch too big.

 

[displacedtexan]

I lied: I just checked and the SWFA windage turret is SLIGHTLY too large to fit in the holes. Which means you have to put it (and the bolt) facing up into the soft padding on top.

Not a huge issue, but it means that you can’t put two Rokstock in there because they have to orient the same way.

A smaller turret would fit. The SWFA is just a touch too big.

You can also cut out some of the grid.

 

[atmat]

You can also cut out some of the grid.

Yeah but that to some degree negates the point of a constantly-customizable grid.