Selling a Brand New Rifle to thin out my safe.
Specs:
Caliber: 6.5 PRC/SI this is a Sherman Improved wildcat version of the PRC. Roughly 50-100 fps faster.
Action: Kelbly Nanook LA 90 degree bolt.
Barrel: 22-inch Proof Research chambered by Kingport Rifles in Idaho
Stock: Allterra Arms Hunter - LOP is roughly 13 3/8"
Trigger: Bix n Andy Tacsport Pro
Bottom Metal/Mag: Hawkins Hunter DBM and Mag with spacer kit.
Weight: 6.8 lbs
NOTE: The pic rail on the front of the stock has a couple marks on it and i installed my suppressor QD so the threads will have some Loctite on them.
Potential partial trades include an over under shotgun, short action Kelbly Nanook/Prometheus, Zermatt short actions, possibly other custom actions, skid steer attachments, tikka chassis, possibly other things.
I'm located in North Dakota and have it listed locally. Reach out if you have any questions.
I will need to ship to your FFL. Asking $4400.
For those not familiar with this cartridge:
Yes, you can shoot 6.5 PRC factory ammo or use reloads to fireform your brass. The SI chamber design has slightly less body taper and a 40 degree shoulder versus the regular PRC. The 40 degree shoulder is what gets you a couple more grains of powder capacity, helps manages pressure better, ultimately giving you a little more speed (50-100fps) versus a regular PRC. You can achieve fire formed brass by doing a proper fire forming process or shooting your brass multiple times to form the brass to the chamber, but either way, you must reload to get the benefit of the SI chamber. If you don't reload you are better off with a regular PRC.
Specs:
Caliber: 6.5 PRC/SI this is a Sherman Improved wildcat version of the PRC. Roughly 50-100 fps faster.
Action: Kelbly Nanook LA 90 degree bolt.
Barrel: 22-inch Proof Research chambered by Kingport Rifles in Idaho
Stock: Allterra Arms Hunter - LOP is roughly 13 3/8"
Trigger: Bix n Andy Tacsport Pro
Bottom Metal/Mag: Hawkins Hunter DBM and Mag with spacer kit.
Weight: 6.8 lbs
NOTE: The pic rail on the front of the stock has a couple marks on it and i installed my suppressor QD so the threads will have some Loctite on them.
Potential partial trades include an over under shotgun, short action Kelbly Nanook/Prometheus, Zermatt short actions, possibly other custom actions, skid steer attachments, tikka chassis, possibly other things.
I'm located in North Dakota and have it listed locally. Reach out if you have any questions.
I will need to ship to your FFL. Asking $4400.
For those not familiar with this cartridge:
Yes, you can shoot 6.5 PRC factory ammo or use reloads to fireform your brass. The SI chamber design has slightly less body taper and a 40 degree shoulder versus the regular PRC. The 40 degree shoulder is what gets you a couple more grains of powder capacity, helps manages pressure better, ultimately giving you a little more speed (50-100fps) versus a regular PRC. You can achieve fire formed brass by doing a proper fire forming process or shooting your brass multiple times to form the brass to the chamber, but either way, you must reload to get the benefit of the SI chamber. If you don't reload you are better off with a regular PRC.
