WTB Custom 300WSM chamber reamer?

[Andy Ivy]

Hey guys

long shot but looking to see if anyone has a standard saaami or a custom 300WSM chamber reamer they would sell.

Will rent, borrow or buy outright.
What do you have?
Thanks

 

[Andy Ivy]

Also anyone thats chambered a few of these please let me know I have some questions about the standard SAMMI chambering, thanks

 

[kingfisher]

https://www.longrangeonly.com/how-t...t-length-with-a-chamber-uni-throating-reamer/

May be worth a look at this piece of equipment. I believe this will take a SAMMI 300wsm camber and make it more conducive to 215 bergers. Maybe someone else with more technical knowledge can come along and clarify. I may do this with my 300wsm prefit.

 

[FURMAN]

Yes my video demonstrates how to use a unithroater. Very simple if you take your time and pay attention. As var has a custom 300 WSM reamer I just sent my smith a dummy round and he cut my chamber accordingly.

 

[Andy Ivy]

Yes my video demonstrates how to use a unithroater. Very simple if you take your time and pay attention. As var has a custom 300 WSM reamer I just sent my smith a dummy round and he cut my chamber accordingly.

Thanks Guys. Do you know if a Sammi spec reamer will be fine with a 200.20X berger. I likely wont shoot anything heavier or longer than that.

 

[FURMAN]

Just looking at the SAAMI print it looks like it has .188 freebore. I would think that would be plenty for the 200.20Xs. Around .200 is great for the 215 and the 200.20X is shorter.

 

[Andy Ivy]

Just looking at the SAAMI print it looks like it has .188 freebore. I would think that would be plenty for the 200.20Xs. Around .200 is great for the 215 and the 200.20X is shorter.

Thank you