Budget Rokslide Special

SIR_34:16

Lil-Rokslider
Joined
Feb 25, 2021
Messages
109
Location
NW PA
After lurking around the 223 thread for a while, I finally decided to get a 223 for my youngest daughter to use for deer hunting. I was frozen with "analysis paralysis" trying to decide between a CZ 600, Tikka compact, RA gen 2 ranch, or Howa mini. I waited too long and missed out on the killer deal CZ had last year on the Alpha's so that was out.

I was really leaning towards the Gen 2 RA. I have an original RA and it is okay, but I'm not wild about the trigger or the way the safety uses a transfer bar that is pinned in place. When the Gen 2 came out, I handled one and the trigger felt the same and it continues to use the transfer bar.

I had the Tikka in my cart a few times when they had the rebate, but was stuck on the price over the Howa mini. The only thing holding me back on the mini was Brownells customer service Q&A said the weight is 6.5 lbs for a barreled action! After researching the weight of complete rifles, I figured this had to be incorrect. So I waited until they ran a sale and picked up the 20" HB version.

When the action came in, I threw it on the scale and it came in at 4 lb 8.5 oz with Burris two piece bases (got impatient and mounted them before getting a raw weight).

IMG_20240317_132827335.jpg

I ordered a Stocky's VG and it came in at 1 lb 5 oz.

IMG_20240319_192434226.jpg

So for about $760, I have a 5 lb 13 oz rifle with a carbon fiber vertical grip stock. I saved about $350 vs having a Tikka threaded and adding the carbon stock, and used the savings to stock up on powder, 77 tmks and 77 smks for practice.

IMG_20240323_104420269.jpg

Part 2 will be a range report....
 

TxLite

WKR
Joined
Sep 6, 2018
Messages
1,956
Location
Texas
Looking forward to seeing your results. I might’ve missed it but which optics are you going with?
 
OP
S

SIR_34:16

Lil-Rokslider
Joined
Feb 25, 2021
Messages
109
Location
NW PA
Right now it has an Arken EPL-4 4-16. I plan on ordering an SWFA 6x MQ if they ever come back in stock.
 
OP
S

SIR_34:16

Lil-Rokslider
Joined
Feb 25, 2021
Messages
109
Location
NW PA
For loads, I had a bunch of bulk Lake City green tip fmj ammo that I sorted into 3 piles; 1 for brass that was really banged up and dented, 1 that was "moderately" dented, and 1 that was minimally dented. I pulled the bullets from the moderately and minimally dented piles and loaded 20 of the moderates with smks and 10 of the minimals with tmks. I left the really banged up ammo to sight in and plink with.

IMG_20240421_155011768_HDR.jpg
IMG_20240421_155021271_HDR.jpg

After bore sighting and getting on paper I shot a group with the bulk green tip ammo and was afraid I made a terrible mistake.
shared_image.png

I moved on to the smk load and shot the next two groups.

shared_image.png

shared_image.png

And finished the day with the tmks
shared_image.png

All in all I was pretty happy with a 1.28" ten-shot group.
 
OP
S

SIR_34:16

Lil-Rokslider
Joined
Feb 25, 2021
Messages
109
Location
NW PA
I should also mention after reading Forms thread about the Howa ultralight, I wanted to test the mini and slammed the bolt closed as hard as I could about a dozen times. The sear held without any problems on this one.
 
Top