Best cooler?

USMC2378

Lil-Rokslider
Joined
Jan 30, 2021
Messages
264
What’s the best cooler to keep things cold when hunting? I keep hearing about Yeti and ORCA any of you have used them? I have a Coleman regular cooler which only keeps ice from melting for about 24 hours which is no bueno. Would like it to keep ice from melting for at least 2 or 3 days.
 

eddielasvegas

WKR & Chairman of the Rokslide Welcoming Committee
Classified Approved
Joined
Feb 2, 2020
Messages
3,708
Location
Scottsdale, AZ
3-7 days is fairly easy with a roto-molded cooler. I have a 65 qt. Canyon Cooler that works really well that I bought used. Yeti, RTIC, Pelican et al (I'm sure even Walmart brand will do the job) should work using the below. Only trying to pass along info as you may not know this.

1) Pre cool the cooler for a day before your trip. I freeze two 1 gallon milk jugs and put them in the cooler a day or so before I leave.

2) I use block ice (usually 2 10 lb blocks) + some cubed ice. These are about $4 a block at my local QT. I finally got smart last year since we have a chest freezer and I make my own blocks using milk jugs for pennies each.


Good luck,

Eddie
 
Last edited:
Joined
May 22, 2017
Messages
565
I have a yeti 65 and honestly, I wouldn’t spend the money on another one. It doesn’t do that great and the lid is a little warped. I would buy an rtic on sale and save some cash.
 
OP
U

USMC2378

Lil-Rokslider
Joined
Jan 30, 2021
Messages
264
3-7 days is fairly easy with a roto-molded cooler. I have a 65 qt. Canyon Cooler that works really well that I bought used. Yeti, RTIC, Pelican et al (I'm sure even Walmart brand will do the job) should work using the below. Only trying to pass along info as you may not know this.

1) Pre cool the cooler for a day before your trip. I freeze two 1 gallon milk jugs and put them in the cooler a day or so before I leave.

2) I use block ice (usually 2 10 lb blocks) + some cubed ice. These are about $4 a block at my local QT. I finally got smart last year since we have a chest freezer and I make my own blocks using milk jugs for pennies each.


Good luck,

Eddie
Great information thank you!
 

Oregonboy

WKR
Joined
Sep 19, 2019
Messages
582
I have an RTIC 65 and I'm very satisfied with it. I bought one of their soft coolers too and it's just as nice,.
 
OP
U

USMC2378

Lil-Rokslider
Joined
Jan 30, 2021
Messages
264
I have a yeti 65 and honestly, I wouldn’t spend the money on another one. It doesn’t do that great and the lid is a little warped. I would buy an rtic on sale and save some cash.

This is some of the info I needed. I wanted to find out if I should be looking at other brands. Thanks!
 

Brendan

WKR
Joined
Aug 27, 2013
Messages
3,875
Location
Massachusetts
Not trying to be snarky, but there's literally about a 1000 threads on this if you search, including multiple tests run by the Rokslide staff.
 

Brendan

WKR
Joined
Aug 27, 2013
Messages
3,875
Location
Massachusetts


 
OP
U

USMC2378

Lil-Rokslider
Joined
Jan 30, 2021
Messages
264
Not trying to be snarky, but there's literally about a 1000 threads on this if you search, including multiple tests run by the Rokslide staff.

Thanks for the info I did a quick search before I posted. Maybe I missed it.
 
OP
U

USMC2378

Lil-Rokslider
Joined
Jan 30, 2021
Messages
264



Great info!! Thanks
 

Vandy321

WKR
Joined
Feb 5, 2019
Messages
2,424
I have owned Pelican and Yeti, both do a fair job, but for 1/2 the price (and half the weight) I just bought a RTIC ultralight 52 and it's performance so far is on par. For $170 it comes with a wire basket and a divider (that is also a gel ice pack).

As mentioned, pre-cool with a bag of ice the day before the trip and any of the high end cooler brands will do.
 
Joined
Oct 13, 2017
Messages
328
Location
Rockies
I use the coleman coastal marine 120 qt. Prechill for 24 hours with ice, add in frozen water jugs before leaving house, wrap an old sleeping bag around it, leave in the back of car in the sun for a week, come back a week later and ice jugs are still frozen. easy and relatively cheap...and the internal volume to external volume is WAY higher than a gucci rotomold cooler.
 
Joined
Dec 14, 2020
Messages
379
Scrap the big expensive coolers and go for a Coleman 6 day extreme. I have a few different sizes and they have been excellent. Best wishes
 

5MilesBack

"DADDY"
Joined
Feb 27, 2012
Messages
16,174
Location
Colorado Springs
I have a Coleman regular cooler which only keeps ice from melting for about 24 hours which is no bueno.
Your Coleman must be broken. I have two Coleman Extreme 6 120's and they'll easily keep my frozen milk jugs at least 75% frozen for a week. I also have an expensive 200qt rotomolded marine cooler, and while it does better..........I still like the Extreme 6's. I always take the expensive one and one of the Coleman's.
 

Ajax2744

FNG
Joined
Feb 11, 2019
Messages
36
I have a grizzly cooler and it does a great job. Made in USA and lifetime warranty and I got it for half the price on Amazon of a comparable yeti
 

SquirrelyDan

Lil-Rokslider
Joined
Jun 18, 2020
Messages
190
Location
Western Washington
Otterbox venture is what I have been using for a few years. Lots of cool accessories and most importantly made in the USA !! I believe it’s injection molded but Iam not sure how that was suppose to be better haha. Good luck !!
 
Joined
Jun 7, 2018
Messages
724
Location
Tennessee
I think my Orion cooler is the best but a lifetime cooler from Walmart does the job just fine also

Sent from my SM-G950U using Tapatalk
 

Jimss

WKR
Joined
Mar 6, 2015
Messages
2,122
The are some great cooler showdowns on YouTube. You would be amazed at some of the comparisons. I bought an oversized Colman for about 1/4 the price of others and have been extremely pleased with its performance
 

Jimss

WKR
Joined
Mar 6, 2015
Messages
2,122
As shoeshine mentioned in his post, place an old sleeping bag over your cooler will help them stay cool even longer!
 
Top