Bee Stinger Stabilizer coming loose

[Hunthigh1]

I have a bee stinger hunter setup with a 10' front stab and 8' side bar. I love the simplicity and speed when removing and attaching with this setup, but the dang thing keeps wanting to come loose at the bow mount and the side bar bracket mount.

Anyone else have similar issue? Should i put some blue loktite on those threads? i need to get this figured out before hunting season because this will not fly when chasing elk and banging it through the woods. I am just shooting it and handling it gently and the thing is loosening up. . .

I will really crank on those threads, but i cant go much tigher without damaging something. . .

 

[TheCougar]

Blue loktite. I think it actually says to do that in the installation instructions. It won't come loose once you use the blue goo.

 

[wapitibob]

Nylon washer will fix it.

 

[mathews8pt]

I wax all the threads heavily. Seems to help a lot.

I do the same with field points and broadheads as well


Sent from my iPhone using Tapatalk

 

[Hunthigh1]

I wax all the threads heavily. Seems to help a lot.

I do the same with field points and broadheads as well


Sent from my iPhone using Tapatalk

"Wax" them?


Sent from my iPhone using Tapatalk

 

[theleo91386]

"Wax" them?


Sent from my iPhone using Tapatalk

Use your string wax. Old trick that works great.

 

[trom2k]

Teflon plumbing tape worked for me.


Sent from my iPhone using Tapatalk

 

[Gumbo]

I had the problem with the same setup and my leather strap sandwiched in between the mount and the riser. I went to a strap with a metal grommet in-between the the mount and the strap and the problem was solved.

 

[Hunthigh1]

Use your string wax. Old trick that works great.

Huh! I'll definitely try it on my field points. Will go with the Loktite on the stab I think. Thanks all


Sent from my iPhone using Tapatalk

 

[gumbl3]

Is there a wrist strap? May need to find a longer bolt and possibly rechase the threads if they're messed up from the mount coming off and on

 

[Bearlodge10]

Had the same problem and like Gumbo mentioned, I decided that it was the leather on my DIY wrist strap that allowed it to loosen. I reworked the hole, shaving a little bit off allowing for a tighter seal and all seems to be well. I have used plumbers tape before and that works as well. I would try that and the wax idea before I went crazy with the blue goo.

 

[theleo91386]

Huh! I'll definitely try it on my field points. Will go with the Loktite on the stab I think. Thanks all


Sent from my iPhone using Tapatalk

Not saying loktite isn't the rite way to go, but personally, I avoid any adhesive like that on my bow.