WTS Barrett Fieldcraft 6.5CM 16" w/ TBAC CB Brake

gtriple

WKR
Joined
Dec 15, 2021
Location
South Carolina
Never thought I'd sell this, but it's not gotten enough usage, and this rifle deserves to be hunted with. It's probably my most accurate rifle and has shot pretty much anything I've put through it sub-moa.

Was originally a 21" unthreaded barrel. I had TBAC cut it to 16" and thread it for their 9/16x24 face mount CB Brake. Threading cost $125 and brake cost $125. This setup would obviously be best with a TBAC CB suppressor. But you can use this adapter to use any standard HUB can.

Comes with both 1" and 30mm low Talley rings ($60 for 30mm rings), as well as the Talley bubble level ($38). Also comes with the shown black buttstock pouch.

The stock has both the Spartan Classic Gunsmith Adapter ($15) and the Classic Rifle Adapter and Picatinny Rail ($50). Cost $100 for a gunsmith to install both.

In total, I've got just over $400 in mods in this gun.

This gun has shot the Unknown Munitions 127gr LRX load extremely well. I've got 28 shots left and fifteen pieces of once shot brass. Value about $70.

I'll sell all of the above for $2300 shipped to the lower 48.

Scope and sling not included in the price above, but they are available if interested in keeping this setup together. I've also got a Spartan Javelin Pro Hunt Tac grey bipod that I can sell.

1000010154.jpg
1000010153.jpg
1000010155.jpg
be5004f6-3018-4a07-a3f7-77c15e55f45e-1_all_42342.jpg
 

Latest posts

Featured Video

Stats

Threads
350,297
Messages
3,690,185
Members
80,131
Latest member
Elias010
Back
Top