I have a couple of barrels laying around that I would like to get rid of.
The first is a Tikka factory barrel chambered in 7mm Remington Magnum. It was removed from a Tikka D-18 (Cabelas version of the Veil). It is cerakoted in Midnight Bronze, is 24" long, fluted and is threaded 5/8-24. It will come with the original thread protector (show in pic) and the original radial brake (not shown). It has a documented 232 rounds down it. I will also send along 100 pieces of PPU 7RM brass. 68 peices of the brass have been fired 2X, the other 32 have been fired 3X. 28 are currently loaded, but I will pull the bullet, dump the powder and remove the primer prior to shipping. I will mark the 32 with a sharpie. All of it will come cleaned and if the buyer wants I can run it through my annealer prior to shipping.
Price is $110 $90, shipped, OBO.
The second barrel is a 260 Remington Remage barrel from McGowan. It is a #3 contour SS barrel with 6 straight flutes, with an 11-degree crown, threaded 5/8-24, and bead blasted matte. The invoice for the barrel is shown below. It has 391 documented rounds down it. The barrel nut is a Patriot Valley Arms barrel nut with the nitride finish. It will also come with the pictured thread protector, 97 pieces of Starline 2x fired brass, and a Hornady FL die set. I can run the brass through my annealer if the buyer desires.
Price for this is$425 $400, shipped. SOLD!
One item of note. Due to the increased amount of scamming on these sites, it is best if you just reach out to me via PM rather than posting an "I'll take it" or an offer on this thread. Also, I will not text or email you without first sending you my email address and phone number via PM so that you know that it is me. So, if you are contacted by someone prior to recieving a PM from me, it is not me, so feel free to mess them with them as much as you want.
The first is a Tikka factory barrel chambered in 7mm Remington Magnum. It was removed from a Tikka D-18 (Cabelas version of the Veil). It is cerakoted in Midnight Bronze, is 24" long, fluted and is threaded 5/8-24. It will come with the original thread protector (show in pic) and the original radial brake (not shown). It has a documented 232 rounds down it. I will also send along 100 pieces of PPU 7RM brass. 68 peices of the brass have been fired 2X, the other 32 have been fired 3X. 28 are currently loaded, but I will pull the bullet, dump the powder and remove the primer prior to shipping. I will mark the 32 with a sharpie. All of it will come cleaned and if the buyer wants I can run it through my annealer prior to shipping.
Price is $
The second barrel is a 260 Remington Remage barrel from McGowan. It is a #3 contour SS barrel with 6 straight flutes, with an 11-degree crown, threaded 5/8-24, and bead blasted matte. The invoice for the barrel is shown below. It has 391 documented rounds down it. The barrel nut is a Patriot Valley Arms barrel nut with the nitride finish. It will also come with the pictured thread protector, 97 pieces of Starline 2x fired brass, and a Hornady FL die set. I can run the brass through my annealer if the buyer desires.
Price for this is
One item of note. Due to the increased amount of scamming on these sites, it is best if you just reach out to me via PM rather than posting an "I'll take it" or an offer on this thread. Also, I will not text or email you without first sending you my email address and phone number via PM so that you know that it is me. So, if you are contacted by someone prior to recieving a PM from me, it is not me, so feel free to mess them with them as much as you want.
